Use Method
For our sublimation offset ink,first print image on paper,second put the paper on fabric,and then press the paper with transfer machine.Under the temperature about 190°C-220°C,the ink on paper will become gas and go into fabric.So the image will be from paper to fabric.
Advantages
Our sublimation ink belongs to envieonmental ink.With our ink,the image will not fall off,cracking and fading.It will be more colorful and abrasion resistance,light fastness.It is used for a variety of domestic and imported offset printing,and its excellent performance won the praise of users throughout all over the world.
Technical Parameter
1.Apply to single-color,two-color and multi-color offset printing machine which supply single paper once.
2.Transfer Paper:coated paper,coating paper,offset paper,or cardboard.
3.Transferred materials can be fabric,cotton,mug,metal,wood,ceramic and etc.Fabric can be transferred directly,other materials need sublimation coating.
4.Color Series:magenta,yellow,cyan.black
Printing Advantages
excellent ink-water balance,dot reproduction clear,complete solid fast,good stability on the machine.
The printing process just needs 3 steps:
1. Print the image on paper,and normal paper is ok.
2. Put the printed paper on substrate,such as polyester and nylon fabric.
3. Put the paper and fabric on the heat-transfer machine.When the temperature reaches 180-220°C, the image will be transfer printed from paper onto the substrate.
Our Suggestion
Before use the ink,play a sample plate printing,if the deviation is not great,and then determinethe comp engraving and printing.Because sublimation ink for gas coloring so can not according to the proportion of ordinary printing Fapai printing.
a. To get 50%C on fabric,the color on paper should be 30%C;
b. To make red PS-plate,the ratio is 100%M and 35%-40%Y;
c. To make blue PS-plate,the ratio is 100%C and 20%M;
d. To make green PS-plate,the ratio is 80%C and 90%Y;
e. To get yellow like Asian skin,the ratio is 10%~11%M and a little cyan.Cyan can be adjusted according to your requirment.
Transfer Temperature
|
Name of fabric
|
Transfer
temperature
|
pressure
|
Time
|
|
Polyester fabric
|
205℃～220℃
|
0.5kg/cm2
|
10～30 seconds
|
|
Polyester deformation fabric low elastic
|
195℃～205℃
|
0.5kg/cm2
|
30 seconds
|
|
Triacetate fabrics
|
190℃～200℃
|
0.5kg/cm2
|
30～40 seconds
|
|
Nylon fabric
|
195℃～205℃
|
0.5kg/cm2
|
30～40 seconds
|
|
Acrylic fabric
|
200℃～210℃
|
0.5kg/cm2
|
30 seconds
|
|
Two acetate fiber fabric
|
185℃
|
0.5kg/cm2
|
15～20 seconds
|
|
Polypropylene nitrile
|
190℃～220℃
|
0.5kg/cm2
|
10～15 seconds
|
|
exposure to sunlight
|
red
|
yellow
|
green
|
black
|
|
5-6
|
6
|
4
|
4
|
Pay Attention To:For other materials,the parameters can refer to the above table.Mug,metal,ceramic,cotton needs subimation coating before transferring.