wireless flashing alarm, siren outdoor alarm, alarm accessories

 

Contact person: Roy C.  Email: sales6(at)finseen(dot)com

 

Wireless flashing siren outdoor with cage FS-F21B
 

Cage protection--damage stopper!

1) DIY, Wireless installation, Easy-to-alarm at spot or at home

2) It goes off alarm to scare away the intruders when wireless sensor is triggered.

3) 32 zones with three of 24hour zones, twenty-eight of common zones, one partial zone.

4) Each zone can be put unlimited sensors by playing jumper to code.

5) Work with all RF our alarm control panel which is built-in RF transmitter.

6) Work with any other RF alarm control panel that is needed to plus output RF transmitter

7) Solar power panels is optional to added

 

Applications:

Easy spot alarm for outdoor field, home, farm, business store, public plaza security, residential area, office, workshop, school, factory, museum, Hospital. bank, electric power Dept. Oil Dept, Railway Dept. financial Dept. Police Dept and so on

 

Specification:

1. Working voltage: input: 110~240VAC,Output :9~12VDC

2. Siren volume:110 dB (Test distance: 300mm, Surrounding noise:<65db)

3, Stand-by is 4~11mA ;working mode: 150~350mA

4, Wireless frequency :433.92 MHz OR 315 MHz, Transmit speed: 3H2+-10%

5. Transmitting distance: noninterference about 180m ; indoor about 30~80 m

6. Backup li-ion battery built-in options support 48hours..Solar power panel optional.

7. Cage protection for mounting on the wall optional

8. Size: 202x114x79mm, Color: white. Strobe light: red

9. Stand pack: one wireless siren with strobe light(backup li-ion battery optional),cage with screws.(other sensors unlimited to be added)

 

Installment and Operation:

1. Code the new sensors to the same address code as wireless siren if you have more new detectors.And then code different protection zone to access the siren by playing pins..

2. Fix siren on the wall or proper place by screw and connect power adaptor.

3. Alarm mode: First arm this siren by pressing "Lock" button thru the remote controller, when detectors are triggered, the siren can directly receive wireless signal from detectors or sensors and goes off alarm. You can disarm it by pressing "Unlock" button, you can press "panic" button on the remote control to go off alarm any situation. Partial disarm the second zone(default sett the PIR motion detector, press "Lock" button and "Lightning" button on remote control

Code Tips: