Pipe Wrap, Joint Coatings & Accessory Products
Xunda carries a full line of products to complement the main line coating systems and meet the challenges of modern pipeline activities.
Utility work: hand-applied tape products for gas utility, oil field, and plumbing applications on small diameter pipe.
Coating repair: cold-applied tape products for plant and field repair of main line coating systems.
Specialty fittings and fabrication work: a variety of tape systems and mastics that conform to irregularly-shaped pipe.
Field joints: single-sided and double-sided tape systems that conform to bell and spigot, welded and mechanically-coupled field joints.
ROW construction: Rockshield system, tie-in, and above-ground tape systems for use at the job site by the pipeline contractor.
Offshore Tapes: Whether replacing PVC on welded joints or protecting Pier Pilings, Xunda has the tape coating for the job.
Product
|
Uses & General Characteristics
|
Total
Thickness |
Adhesion
to Primed Steel Pipe |
Maximum
Temperature |
1027
|
Solvent-based primer designed for brush, roller or spray application to mechanically cleaned pipe surfaces. Contains stress-corrosion cracking inhibitors.
|
N/A
|
N/A
|
100°C
212°F |
910
|
All-purpose tape system for field application in the oil patch.
|
0.25 mm
10 mil |
11 N/10 mm
100 oz/in |
66°C
150°F |
900
|
General utility tape for hand application on small diameter pipe, joints and fittings.
|
0.30 mm
12 mil |
11 N/10 mm
100 oz/in |
66°C
150°F |
930(-35)
|
Heavy duty joint wrap tape for hand wrapping in applications where higher shear properties are required. Designed without release liner for less waste and ease of use.
|
0.89 mm
35 mil |
25 N/10 mm
225 oz/in |
66°C
150°F |
932(-35)
|
Cold-applied tape system with an elevated high-tack adhesive. Provides excellent conformability when hand applied to field joints, fittings and specialty piping. EN/DIN B30 Qualified.
|
0.89 mm
35 mil |
28 N/10 mm
250 oz/in |
66°C
150°F |
932(-50)
|
1.27 mm
50 mil |
28 N/10 mm
250 oz/in |
66°C
150°F |
|
934(-35)
|
Cold-applied tape system with a high tack adhesive. Used as a patch/repair system and as the primary corrosion protection system on field joints, fittings and specialty piping.
|
0.89 mm
35 mil |
28 N/10 mm
250 oz/in |
66°C
150°F |
934(-50)
|
1.27 mm
50 mil |
35 N/10 mm
320 oz/in |
66°C
150°F |
|
939
|
100% solids mastic designed as a self-adhering filler material prior to overcoating with Polyken joint coating tape systems.
|
3.17 mm
125 mil |
33 N/10 mm
300 oz/in |
93°C
200°F |
954
|
Mechanical protection layer for use with all of the Polyken joint wrap coating products. Easy hand or (outerwrap) (outerwrap) machine application.
|
0.38 mm
15 mil |
N/A (outerwrap)
|
85°C
185°F |