ALUMINUM FOIL TAPE, FLASHING TAPE, PEEL/STICK ROOF TAPE, has a heavy aluminum facing together with an extra thick rubberized asphalt based adhesive system. The aluminum facing is embossed to provide flexibilty for wrapping irregular shapes and surfaces.
The Xunda-T 700 series is recommended for most types of roofs, windows and flashing problems including:
Trailers
RV's
Mobile homes
Industrial buildings
Roof awnings
Truck Trailers
Chimney Flashing
Roof to Wall Flashing
Ridge Flashing Window frames of glass, metal, plastic
Wood including OSB
Clay and Cement Roof Tiles
Structure:
The specification of the tape consists of three layers,
Adhesive: Fexible modified bitumen adhesive compound.
Film backing: Aluminium foil
Interleaf: Antiadhesive Film Treated with Silicone
Features:
Aluminum backing is more moldable - it conforms better to irregular surface features - for weather-tight seals
Excellent For Flashing
No Messy Sealant
Stays Flexible
Aggressive Grip
Superior Adhesion
Assure Immediate Leakproof Results
Easy, Fast Application
No Harmful VOC’s
Ideal Adhesive/Sealant Thickness
TECHNICAL DATA:
Product Data Sheet Total Thickness:30mil, 40mil, 60 mils.
Adhesive: rubberized asphalt
Manufacturers Warranty: 10 Years
Shelf Life: 12 months
APPLICATION: The surfaces to be sealed must be clean, dry and free of loose rust, scale, dust, talc and dirt. All oil, grease, silicone or other contaminates should be first removed with a suitable solvent/cleaner.
For older roofs use a stiff brush to remove all loose granules and surface elements.
Porous surfaces should be primed with a common asphalt based primer and allowed to dry before Xunda-T 700 is applied.
Install Xunda-T 700 by gradually peeling away the plastic release liner while rubbing the Xunda-T 700 to the surface.
Hint: prevent bubbles under the product by using your hand to squeegee out air by wiping your hand towards the roll as you set the tape to the surface.
Overlap seams or sealing are of application by 3 inches.