Special formula for door parts pressing, the pressing products features fine surface finishing, low shrinkage, water resistance, stable function, etc,widely used for door plates. 

Property	unit	value	Test Method
Specific Gravity	g/cm³	1.70-1.90	ASTM D792
Water Absorption	%	≤0.15	ASTM D570
Shrinkage	%	≤0.08	ASTM D955
Flexural Strength	MPa	≥130	ASTM D790
Flexural Modulus	GPa	≥8.0	ASTM D790
Tensile Strength	MPa	≥50.0	ASTM D638
Impact Strength	J/ m	≥40.0	ASTM D256

1. Holding Time: 60second/mm, which can be adjusted based on your conditions.
2. Molding Surface Temperature: from 140℃ to 155℃.
3. Pressure: > 100Kgf/ cm2

SMC is packaged by aluminum film and stored under 25℃. The storage period is two months since the production date.