Features at a Glance
Specifications
Mechanical & General Specifications
YHS715 Volt/mA Calibrator is a source and measurement tool. This Calibrator can be used in measurement or output 0 to 24 mA DC current loop, and 0 to 10 V DC voltage.
· Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution
· Measure voltage output process signals from PLCs, transmitters
· Source or simulate 24 mA loop current
· Source voltage to 100 mV or 10V
· 24V loop supply with simultaneous current measurement
· Enhanced voltage and current measure and source accuracy
· Improved battery life
· 250 ohm HART resistor with loop power
· Holster features test lead storage
· Compatible with toolpack magnetic hanging system
· Step and linear ramp output function
· Configurable zero and span settings
Functional specifications
|
Measure / Source mV
|
Range:
|
0 to 100 mV
|
|
Resolution:
|
0.01 mV
|
|
|
Accuracy:
|
0.02% + 2 counts
|
|
|
Measure / Source V
|
Range:
|
0 to 10 V
|
|
Resolution:
|
0.001 V
|
|
|
Accuracy:
|
0.02% + 2 counts
|
|
|
Measure / Source/ Simulate mA (% of span)
|
Range:
|
0 to 24 mA (-25% to 125%)
|
|
Resolution:
|
0.001 mA
|
|
|
Accuracy:
|
0.015% + 4 counts
|
|
|
Note: Sink (simulate transmitter) Display mA or % of span
|
||
|
Loop Power
|
Range:
|
24 V dc
|
|
Accuracy:
|
+/- 10%
|
|
|
Note: Drive; 20 mA into 1000 Ω for battery >6.8V; 700 Ω for battery 5.8 to 6.8 V
|
||
|
Display
|
Clear 5 digit LCD
|
|
|
Weight:
|
350g (include battery)
|
|
Size:
|
190mm × 89mm × 42mm
|
|
Battery:
|
9VDC,006P or 1604
|