YUCOO-RS232-01 Fiber Optical modem is equipped with a multiple interface circuit that can handle RS-232 serial interfaces and multi-mode or single- mode fiber. YUCOO-RS232-01 Fiber Optical modem converters are used to extend serial transmission distance up to 2 km (multi-mode fiber) or up to 20-100km (single- mode fiber). Note that the RS-232 interfaces cannot be used on the same Model RS232at the same time to convert to fiber. Auto Baud Rate Detection.
YUCOO-RS232-01 Fiber Optical modem incorporates a method for automatically detecting the serial signal baud rate by hardware. This is an extremely convenient feature for the user. Even if a device's baud rate is changed, the signal will still be transmitted through the RS-232 to fiber converter without any problem.
-
Special Features
Optional multi-mode (YUCOO-RS232-01/MM), single-mode (YUCOO-RS232-01/SM)
Auto sense serial signal rate, zero delay automatic transmit
Support 5V Volt input, consumption 2W
Internal or external power optional.
Multi-mode 2KM, signal-mode 20-100KM
Auto sense serial signal rate, zero delay automatic transmit
Support 5V Volt input, consumption 2W
Internal or external power optional.
Multi-mode 2KM, signal-mode 20-100KM
Environment :
Working Temperature : -25 ° C to 70 ° C
Storage temperature -40 ° C to 85 ° C
Humidity : 5% to 95% relative humidity
Working Temperature : -25 ° C to 70 ° C
Storage temperature -40 ° C to 85 ° C
Humidity : 5% to 95% relative humidity
Power :
Input power supply : 5-40V wide input voltage
power dissipation : 2W
Input power supply : 5-40V wide input voltage
power dissipation : 2W
Appearance:
length*width*height: 100mm*69mm*22mm
Shell : Steel
Colors : white
Weight : 230g
length*width*height: 100mm*69mm*22mm
Shell : Steel
Colors : white
Weight : 230g