ZHONGLIQI Sublimation Thermal Transfer Offset Printing Ink
For our offset sublimation ink,first print image on paper,second put the paper on fabric,and then press the paper with transfer machine.Under the temperature about 190°C-220°C,the ink on paper will become gas and go into fabric.So the image will be from paper to fabric.
Advantages
Our sublimation ink belongs to envieonmental ink.With our ink,the image will not fall off,cracking and fading.It will be more colorful and abrasion resistance,light fastness.It is used for a variety of domestic and imported offset printing,and its excellent performance won the praise of users throughout all over the world.
Use Scope
Apply to single-color,two-color and multi-color offset printing machine which supply single paper once.
Transfer paper
Chrome paper,coated paper,offset paper,and cardboard.
Transfer materials
Fabric,cotton,mug,metal,wood,ceramic and etc.Fabric can be transferred directly,other materials need sublimation coating.
Product characteristics
(1),be able to adapt to high-speed printing needs;
(2),under normal circumstances to maintain the printing press ink fountain 36 hours not conjunctiva.
Such kind of offset sublimation ink is used on offset machine,if you want to print a perfect image,just need 3 steps:
1. Put the image on paper,normal paper is ok.
2. Put the printed paper on substrates,such as polyester and nylon fabric.
3. Put the paper and substrate on the heat transfer machine.When temperature reach 180-220 degrees,the image will be transferred from the paper onto substrate.
1. Put the image on paper,normal paper is ok.
2. Put the printed paper on substrates,such as polyester and nylon fabric.
3. Put the paper and substrate on the heat transfer machine.When temperature reach 180-220 degrees,the image will be transferred from the paper onto substrate.
Application examples
a.To get 50%C on fabric,the color on paper should be 30%C
b.To make red PS-plate,the ratio is 100%M and 35%-40%Y
c.To make blue PS-plate,the ratio is 100%C and 20%M
d.To make green PS-plate,the ratio is 80%C and 90%Y
e.To get yellow like Asian skin,the ratio is 10%~11%M and a little cyan.Cyan can be adjusted according to your requirment
Offset Sublimation Ink-Transfer Temperature
|
Name of fabric
|
Transfer
temperature
|
pressure
|
Time
|
|
Polyester fabric
|
205°C~220°C
|
0.5kg/cm2
|
10~30 seconds
|
|
Polyester deformation fabric low elastic
|
195°C~205°C
|
0.5kg/cm2
|
30 seconds
|
|
Triacetate fabrics
|
190°C~200°C
|
0.5kg/cm2
|
30~40 seconds
|
|
Nylon fabric
|
195°C~205°C
|
0.5kg/cm2
|
30~40 seconds
|
|
Acrylic fabric
|
200°C~210°C
|
0.5kg/cm2
|
30 seconds
|
|
Two acetate fiber fabric
|
185°C
|
0.5kg/cm2
|
15~20 seconds
|
|
Polypropylene nitrile
|
190°C~220°C
|
0.5kg/cm2
|
10~15 seconds
|
|
exposure to sunlight
|
red
|
yellow
|
green
|
black
|
|
5-6
|
6
|
4
|
4
|
For alumina plate,stainless steel plate,copper plate and porcelain with coating,the transfer temperature can refer to the above table.