Style and Their Feature of NINGBO T.C.I Mist Eliminator

Style	Density kg/m3	FreeVolume %	SurfaceArea m2/m3	Products of Other Companies
				Metex	York	Becoil	Knitmesh	Vico-Tex	Uop	Koch	Acs
H	80	99.0	158	Hi-Thruput	931	954	4536	160	B	511	7CA
L	120	98.5	210		422
N	144	98.2	280	Nu-Stanadrd	431		9030	280	A	911	4CA
SN	128	98.4	460		326			415		706
SL	193	97.5	375	Xtra-Dense	421	890	9033	380	C	1211	4BA
SM	300	96.2	575
SH	390	95.0	750
T	220	97.2	905
R	432	94.5	1780	Multi-Strand	333			800
W	220	97.2	428	Wound
GS	160	96.7	5000		371

STYLE	Can permit highest vapour velocities for mist load than any other styles. Used in case of low-pressure loss is required, or when blocking-up may occur, or when the removal of larger mist or high efficiency is not required. Usually used 150 m/m thickness. As for the efficiency equivalent to SL-Style, used in 200 m/m thickness
N-Style	Used when high efficiency is required. Though pressure loss is increased slightly, it is considered to have 95-98% efficiency against 3μ mist at 1-6 m/sec velocity. This S-Style is especially needed when approximately 90% efficiency at 1 m/sec velocity is required.
T-Style	Used for removing of every minute mist of approximately 1μ. The most efficient type for its thickness.