FC610B Fast Ethernet Fiber Media Converters
Overview
HiOSO FC610B is a kind of 10/100Mbps adaptive fast Ethernet fiber media converter (also called optical-to-electric medium converter), which can implement mutual conversion between two independent 10Base-T/100Base-TX twisted pair electrical signal and 100Base-FX optical signal. This type of fiber converter can extend the transmission distance of a network from the limit of 100m (via copper wires) to 120Km (single-mode full-duplex mode). FC610B supports two different types of network connection medium types: 10/100Base-TX and 100Base-FX. With the application of the switching technology and the storing & forwarding technology, the converter can implement data transmission between the two types of network connection media. It supports transmission in dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fibers.
HiOSO FC610B is a kind of 10/100Mbps adaptive fast Ethernet fiber media converter (also called optical-to-electric medium converter), which can implement mutual conversion between two independent 10Base-T/100Base-TX twisted pair electrical signal and 100Base-FX optical signal. This type of fiber converter can extend the transmission distance of a network from the limit of 100m (via copper wires) to 120Km (single-mode full-duplex mode). FC610B supports two different types of network connection medium types: 10/100Base-TX and 100Base-FX. With the application of the switching technology and the storing & forwarding technology, the converter can implement data transmission between the two types of network connection media. It supports transmission in dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fibers.
Features
- Adaptive 10Mbps and 100Mbps environment, for the convenience of network upgrade;
- Efficient built-in switching core, to implement flow control and reduce broadcast packets;
- Providing two independent 10/100Mbps adaptive switching-type twisted pair ports, to implement electrical interface backup;
- Supporting full-duplex and half-duplex transmission modes and capable of automatic negotiation;
- Supporting automatic cross of twisted pair ports, for the convenience of system debugging and installation;
- Supporting the transmission of extra-long packets (with the maximum length of 1552 bytes);
- Supporting the transmission of extra-long packets over VLAN;
- Supporting Quality of Service (QoS) and ensuring transmission of VoIP packets;
- Supporting Spanning Tree Protocol (STP) to form a redundant network;
- Extremely low power consumption (less than 2W), low heat and capable of stable operation for a long period of time;
- Supporting multiple types of fiber ports such as dual-fiber multi-mode,dual-fiber single-mode and single-fiber single-mode, to satisfy the extended requirements of users.
Application
10/100Mbps fast optical Ethernet network with long-distance transmission
Technical Specifications
10/100Mbps fast optical Ethernet network with long-distance transmission
Technical Specifications
|
Parameters
|
Specifications
|
|
Access mode
|
10/100Mbps
|
|
Standard
|
IEEE802.3 10Base-T Ethernet, IEEE802.3u, 100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree
|
|
Wavelength
|
850nm/1310nm/1550nm
|
|
Transmission distance
|
Dual-fiber multi-mode: 2Km;
Dual-fiber single-mode: 25/40/60/80/100/120Km; Single-fiber single-mode: 25/40/60/80/100Km Category-5 twisted pairs: 100m |
|
Port
|
Two RJ45 ports: Connected to STP/UTP category-5 twisted pairs
One fiber port: Multi-mode – SC or ST (fiber size: 50,62.5/125μm) Single mode – SC/FC fiber port (fiber size: 9/125μm) Single-fiber single-mode – SC/FC fiber port (fiber size: 9/125μm) |
|
Conversion mode
|
Medium conversion, storing and forwarding mode
|
|
MAC address table
|
I K
|
|
Buffer space
|
1Mbit
|
|
Flow control
|
Full duplex state: flow control; half-duplex state: back pressure mode
|
|
Delay
|
9.6μs
|
|
Bit error rate
|
<1/1000000000
|
|
MTBF
|
100,000 hours
|
|
LED
|
POWER (power), FX LINK/ACT (fiber link/action), FX FDX (FX full duplex mode)
TP1 LINK/ACT (Port 1 twisted pair link/action), TP1 100 (port 1 twisted pair 100M transmission rate) TP2 LINK/ACT (Port 2 twisted pair link/action), TP2 100 (port 2 twisted pair 100M transmission rate) |
|
Power
|
DC5V/1A (external)
|
|
Power consumption
|
3.2W
|
|
Operating temperature
|
-10~55°C
|
|
Operating humidity
|
5%~90%
|
|
Storage temperature
|
-40~70°C
|
|
Storage humidity
|
5%~90% (non-condensing)
|
|
Dimensions
|
24mm(H)*59mm(W)*98mm(D) (height * width * depth) (external power) 26mm(H)*85mm(W)*135mm(D) (height * width * depth) (built-in power)
|
Order Information
|
Model |
Rate
(Mbps) |
Mode
|
Working Wavelength (nm)
|
Transmission Distance (Km)
|
Fiber Interface
|
Power
|
|
FC610BM-SC/ST
|
10/100
|
Dual-fiber multimode
|
1310
|
2
|
SC/ST
|
External DC5V/1A
|
|
FC610BPM-SC/ST
|
10/100
|
Dual-fiber multimode
|
1310
|
2
|
SC/ST
|
Internal AC 220V
|
|
FC610BCM-SC/ST
|
10/100
|
Dual-fiber multimode
|
1310
|
2
|
SC/ST
|
Card
DC5V
|
|
FC610BS20/40/60-SC/FC
|
10/100
|
Dual-fiber single-mode
|
1310
|
25/40/60
|
SC/FC
|
External DC5V/1A
|
|
FC610BPS20/40/60-SC/FC
|
10/100
|
Dual-fiber single-mode
|
1310
|
25/40/60
|
SC/FC
|
Internal AC 220V
|
|
FC610BCS20/40/60-SC/FC
|
10/100
|
Dual-fiber single-mode
|
1310
|
25/40/60
|
SC/FC
|
Card
DC5V
|
|
FC610BS80/100/120-SC/FC
|
10/100
|
Dual-fiber single-mode
|
1550
|
80/100/120
|
SC/FC
|
External DC5V/1A
|
|
FC610BPS80/100/120-SC/FC
|
10/100
|
Dual-fiber single-mode
|
1550
|
80/100/120
|
SC/FC
|
Internal AC 220V
|
|
FC610BCS80/100/120-SC/FC
|
10/100
|
Dual-fiber single-mode
|
1550
|
80/100/120
|
SC/FC
|
Card
DC5V
|
|
FC610BSS20/40/60/80/100-SC
|
10/100
|
Single-fiber single-mode
|
WDM 1310/1550
|
25/40/60/80/100
|
SC
|
External DC5V/1A
|
|
FC610BPSS20/40/60/80/100-SC
|
10/100
|
Single-fiber single-mode
|
WDM 1310/1550
|
25/40/60/80/100
|
SC
|
Internal AC 220V
|
|
FC610BCSS20/40/60/80/100-SC
|
10/100
|
Single-fiber single-mode
|
WDM 1310/1550
|
25/40/60/80/100
|
SC
|
Card
DC5V
|