Product Main

Specifications

FC650F Fiber Media Converter Series
 
Overview

HiOSO FC650F is a kind of 10/100Mbps adaptive fast Ethernet fiber media converter, with a built-in 3-port 10/100Mbps adaptive switch, which can implement mutual conversion between 10Base-T/100Base-TX twisted pair electrical signal and 100Base-FX optical signal. FC650F can extend the transmission distance of a network from 100m over copper wires to 120Km. This type of fiber converter supports two different types of network connection media types: 10/100Base-TX and 100Base-FX. With the application of the switching technology and the storing & forwarding technology, this kind of converter supports transmission in dual-fiber multi-mode,dual-fiber single-mode and single-fiber single-mode fibers.

Features
  • Adaptive 10Mbps and 100Mbps environments, for the convenience of network upgrade;
  • Efficient built-in switching core, to implement flow control and reduce broadcast packets;
  • Provide 3 independent 10/100Mbps adaptive switching-type twisted pair ports, to implement electrical interface backup and multi-user access;
  • Provide electrical interfaces based on VLAN switch setting, and supporting the connection of users from different units;
  • Support full-duplex and half duplex transmission modes and capable of automatic negotiation;
  • Support automatic crossing of twisted pair ports, for the convenience of system debugging and installation;
  • Support the transmission of extra-long packets (with the maximum length of 1552 bytes);
  • Support Quality of Service (QoS) and ensuring transmission of VoIP packets;
  • Support Spanning Tree Protocol (STP) to form a redundant network;
  • Low power consumption, low heat and capable of stable operation for a long period of time;
  • Support multiple types of fiber ports such as dual-fiber multi-mode,dual-fiber single-mode and single-fiber single-mode, expanding the requirements of users;
Application
10/100Mbps fast Ethernet long-distance transmission network
 

Technical Specifications
 

Parameter
Specifications
Access mode
10/100Mbps
Standard
IEEE802.3 10Base-T Ethernet, IEEE802.3u, 100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree
Wavelength
850nm/1310nm/1550nm
Transmission distance
Dual-fiber multi-mode: 2Km;
Dual-fiber single-mode: 25/40/60/80/100/120Km;
Single-fiber single-mode: 25/40/60/80/100Km
Category-5 twisted pair: 100m
Port
1/3 RJ45 connector, connected to STP/UTP category-5 twisted pair
Two fiber port: Multi-mode - SC or ST (fiber size: 50,62.5/125μm)
Single mode - SC/FC fiber port (fiber size: 9/125μm)
Single-fiber single-mode - SC/FC fiber port (fiber size: 9/125μm)
Conversion mode
Medium conversion, storing and forwarding mode
MAC address table
I K
Buffer space
1Mbit
Flow control
Full duplex state: flow control; half duplex state: back pressure mode
Delay
9.6us
Bit error rate
<1/1000000000
MTBF
100,000 hours
LED
POWER (power), FX LINK/ACT (fiber connection/action)
FDX (FX full duplex mode), FX100 (Fiber, with a transmission rate of 100M)
TP1/2/3 LINK/ACT (1/2/3-port twisted pairs connection action)
TP1/2/3100 (1/2/3-port twisted pairs, with a transmission rate of 100M)
Power
DC5V/1A (external)
Power consumption
3.5W
Operating temperature
-10~55℃
Operating humidity
5%~90%
Storage temperature
-40~70℃
Storage humidity
5%~90% (non-condensing)
Dimensions
26mm(Height)*70mm(Width)*98mm(Depth) (external power)
 

Order Information
 

Model
Rate
(Mbps)
Mode
Working Wavelength
(nm)
Transmission Distance
(Km)
Fiber
Interface
Power
FC650FM2-SC/ST
10/100
Dual-fiber multi-mode
1310
2
SC/ST
External DC5V/1A
FC650FS20/40/60 -SC/FC
10/100
Dual-fiber single-mode
1310
25/40/60
SC/FC
External DC5V/1A
FC650FS80/100/120-SC/FC
10/100
Dual-fiber single-mode
1550
80/100/120
SC/FC
External DC5V/1A
FC650FS-S20/40/60-SC
10/100
Single-fiber single-mode
1310/1550
25/40/60
SC
External DC5V/1A
FC650FS-S80/100-SC
10/100
Single-fiber single-mode
1310/1550
80/100
SC
External DC5V/1A