FC1050 Giga Fiber Converter with 4 Ports
Features
Technical Specifications
Ordering Information
Overview
HiOSO FC1050 a kind of 10/100/1000Mbps adaptive gigabit Ethernet fiber converter (also called optical-to-electric medium converter) with a built-in four-port auto crossover MDI/MDI-X 10/100/1000Mbps adaptive switch, which can implement mutual conversion between four independent 10Base-T/100Base-TX/1000Base-T twisted pair electrical signal and 1000Base-X optical signal. FC1050 can extend the transmission distance of a network from 100m over copper wires to 100Km (single-mode full-duplex mode).
HiOSO FC1050 a kind of 10/100/1000Mbps adaptive gigabit Ethernet fiber converter (also called optical-to-electric medium converter) with a built-in four-port auto crossover MDI/MDI-X 10/100/1000Mbps adaptive switch, which can implement mutual conversion between four independent 10Base-T/100Base-TX/1000Base-T twisted pair electrical signal and 1000Base-X optical signal. FC1050 can extend the transmission distance of a network from 100m over copper wires to 100Km (single-mode full-duplex mode).
This type of fiber converter supports two types of network connection medium: 10Base-T/100Base-TX/1000Base-T and 1000Base-X. With the application of the switching technology and the storing & forwarding technology, FC1050 can implement data transmission between two types of network connection medium. This kind of converter supports transmission in dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fibers.
Features
- Adaptive 10/100/1000Mbps Ethernet network, for the convenience of network upgrading;
- Efficient built-in switching core, to implement flow control and reduce broadcast packets;
- Providing four independent 10/100/1000Mbps adaptive switching-type twisted pair ports, to implement electrical interface backup and multi-user access;
- Supporting full-duplex and half-duplex transmission modes and capable of automatic negotiation;
- Supporting automatic crossing of twisted pair ports, for the convenience of system debugging and installation;
- Supports IGMP v1/v2/v3 and MLD v1/v2 snooping
- Supporting Quality of Service (QoS) and ensuring transmission of VoIP packets;
- Supporting Spanning Tree Protocol (STP) to form a redundant network;
- Low power consumption, low heat and capable of stable operation for a long period time;
- Supporting multiple types of fiber ports such as dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode, expanding the requirements of users;
- 802.1Q tag based VLAN(up to 4 VLAN)
- 802.1P 4 egress priority queues
Application
10/100/1000Mbps Ethernet long-distance transmission network
10/100/1000Mbps Ethernet long-distance transmission network
Technical Specifications
Parameter
|
Specifications
|
Access mode
|
10/100/1000Mbps
|
Standard
|
IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE 802.3ab 1000Base-T Gigabit Ethernet, IEEE 802.3z 1000Base-SX/LX ,IEEE802.3x Flow control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree protocol
|
Wavelength
|
850nm/1310nm/1550nm
|
Transmission distance
|
Dual-fiber multi-mode: 2Km;
Dual-fiber single-mode: 25/40/60/80/100/120Km;
Single-fiber single-mode: 25/40/60/80/100Km
Category-5 twisted pair: 100m |
Port
|
Four RJ45 connector:connected to STP/UTP category-5 twisted pair
One fiber port: Multi-mode - SC or ST (fiber size: 50,62.5/125μm) Single mode - SC/FC fiber port (fiber size: 9/125μm) Single-fiber single-mode - SC/FC fiber port (fiber size: 9/125μm) |
Conversion mode
|
Medium conversion, storing and forwarding
|
Maximum frame size
|
1522 bytes including tag/CRC
|
MAC address table
|
I K
|
Buffer space
|
1Mbit
|
Flow control
|
Full duplex state: flow control; half duplex state: back pressure mode
|
Delay
|
9.6us
|
Bit error rate
|
<1/1000000000
|
MTBF
|
100,000 hours
|
LED
|
PWR (power),FX LINK/ACT (fiber connection/action), TP1/2/3/4 LINK/ACT (1/2/3/4-port twisted pairs connection action)
TP1/2/3/4 1000 (1/2/3/4-port twisted pairs, with a transmission rate of 1000M) |
Power
|
DC5V/2A (external)
|
Power consumption
|
3.5W
|
Operating temperature
|
-10~55°C
|
Operating humidity
|
5%~90%
|
Storage temperature
|
-40~70°C
|
Storage humidity
|
5%~90% (non-condensing)
|
Dimensions
|
26mm(Height)*104mm(Width)*119mm(Depth) (external power)
|
Ordering Information
Model |
Rate
(Mbps) |
Mode
|
Working Wavelength
(nm) |
Transmission Distance
(Km) |
Fiber Interface
|
Power
|
FC1050 M-SC/ST
|
10/100/1000
|
Dual-fiber multi-mode
|
1310
|
2
|
SC/ST
|
External DC5V/2A
|
FC1050 S20/40/60 -SC/FC
|
10/100/1000
|
Dual-fiber single-mode
|
1310
|
25/40/60
|
SC/FC
|
External DC5V/2A
|
FC1050 S80/100/120-SC/FC
|
10/100/1000
|
Dual-fiber single-mode
|
1550
|
80/100/120
|
SC/FC
|
External DC5V/2A
|
FC1050S S20/40/60-SC
|
10/100/1000
|
Single-fiber single-mode
|
1310/1550
|
25/40/60
|
SC
|
External DC5V/2A
|
FC1050S S80/100-SC
|
10/100/1000
|
Single-fiber single-mode
|
1310/1550
|
80/100
|
SC
|
External DC5V/2A
|