Product Main

Specifications

FC650M Fiber Converter

Overview

HiOSO FC650M is a kind of 10/100Mbps adaptive fast Ethernet fiber converter (also called optical-to-electric medium converter) with a built-in four-port 10/100Mbps adaptive switch, which can implement mutual conversion between four independent 10Base-T/100Base-TX twisted pair electrical signal and 100Base-FX optical signal.
FC650M can extend the transmission distance of a network from 100m over copper wires to 100Km (single-mode full-duplex mode). This type of fiber converter supports two types of network connection medium: 10/100Base-TX and 100Base-FX. With the application of the switching technology and the storing & forwarding technology.
 FC650M can implement data transmission between two types of network connection medium. This kind of converter supports transmission in dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fibers.

Features
  • Adaptive 10/100Mbps Ethernet network, for the convenience of network upgrading;
  • Efficient built-in switching core, to implement flow control and reduce broadcast packets;
  • Providing four independent 10/100Mbps adaptive switching-type twisted pair ports, to implement electrical interface backup and multi-user access;
  • Supporting full-duplex and half-duplex transmission modes and capable of automatic negotiation;
  • Supporting automatic crossing of twisted pair ports, for the convenience of system debugging and installation;
  • Supporting the transmission of extra-long packets (with the maximum length of 1552 bytes);
  • 802.1Q tag based VLAN(up to 4 VLAN)
  • IGMP snooping V1 V2
  • SNMP support
  • Management through telnet,snmp and web
  • Cisco-like CLI interface
  • Traffic Management and Qos
  • 802.1p 4 egress priority queues
  • Rate limiting
  • Configurate IGMP snooping time and priority
  • Supporting Spanning Tree Protocol (STP) to form a redundant network; 
  • Low power consumption, low heat and capable of stable operation for a long period time;
  • Supporting multiple types of fiber ports such as dual-fiber multi-mode,dual-fiber single-mode and single-fiber single-mode, expanding the requirements of users;
Application
10/100Mbps Ethernet long-distance transmission network
 
 
Technical Specifications
 

Parameter
Specifications
Access mode
10/100Mbps
Standard
IEEE802.3 10Base-T Ethernet, IEEE802.3u, 100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree
Wavelength
850nm/1310nm/1550nm
Transmission Distance
Dual-fiber multi-mode: 2Km;
Dual-fiber single-mode: 25/40/60/80/100/120Km;
Single-fiber single-mode: 25/40/60/80/100Km
Category-5 twisted pair: 100m
Port
Four RJ45 connector:connected to STP/UTP category-5 twisted pair
One fiber port: Multi-mode - SC or ST (fiber size: 50,62.5/125μm)
Single mode - SC/FC fiber port (fiber size: 9/125μm)
Single-fiber single-mode - SC/FC fiber port (fiber size: 9/125μm)
Conversion mode
Medium conversion, storing and forwarding
MAC address table
I K
Buffer space
1Mbit
Flow control
Full duplex state: flow control; half duplex state: back pressure mode
Delay
9.6us
Bit error rate
<1/1000000000
MTBF
100,000 hours
LED
POWER (power), FX LINK/ACT (fiber connection/action)
FDX (FX full duplex mode), RUN (CPU run )
TP1/2/3/4 LINK/ACT (1/2/3/4-port twisted pairs connection action)
TP1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100M)
Power
DC5V/1A (external)
Power consumption
2.5W
Operating temperature
-10~55°C
Operating humidity
5%~90%
Storage temperature
-40~70°C
Storage humidity
5%~90% (non-condensing)
Dimensions
26mm(Height)*104mm(Width)*119mm(Depth) (external power)