CM921 9ch DSM2/DSMX 2 RC Receiver with Satellite Control Distance to 1000M 

MICROLITE DSM2 Receiver & Satellite 

Receiver Specifications:  

    1. Type: 9-Channel Full-Range DSM2/DSMX Receiver

     2.Modulation: DSM2/DSMX

    3.Band:  2.4GHz

    4.Dimensions (WxLxH): 30 x 50 x 13mm
    5.Weight:  14g
    6.Voltage Range: 4-10v

    7.Brown-Out Voltage: 4.0v  (Always supply power  above this voltage)
    8.Antenna Length Main RX: 30mm (2)

     9.Expected Range: 800m~1000m 

Key Features: 

      9 channels
      Patent pending Model Match prevents flying a model using the wrong model memory (feature does not work with module systems)
      ServoSync (feature does not work with module systems)
      Preset fail safe system

      Quick Connect

      Horizontal-Pin configuration

      Red LED indicates number of hold

      Compatibility (Spectrum and JR DSM2/DSMX): DX6I,DX7,DX9,DSX7,DSX9

      Working Voltage : 4 to 1.0v

     Wireless simulator interface(W.D.S.C),support REFLEXTR,G3,G4,G5 fly simulator 

Binding Procedure: 

1. Put the binding harness into connector location marked BIND.  Next apply power to the receiver.  Both receiver and  Satellite LED's should illuminate.

2. To set fail-safe throttle and control surface positions, (minimum throttle with and all control surfaces set to neutral is suggested).  Press the bind button (LED will illuminate).  Turn on the transmitter.  

3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now. 

4. Remove binding harness from the BIND channel.  Restart the receiver by cycling it's power off and back on.  All channels should function properly now.  You may test fail-safe by holding sticks in corner, cycle transmitter off.  Surfaces and throttle should return to your preset fail-safe positions set in 

General Notes:

Only one bind procedure is required on a new receiver.  Repetitive binding provides no extra security.  Always remember to remove the binding harness after successful bind is completed.

 Wireless simulator interface(W.D.S.C) :

2. Receiver must bind with transmitter firist(AUX4 channel do not plug bingding harness)

3. AUX3 is the (W.D.S.C) channel,connect with simulator line 

4. BIND channel and AUX4 channel plug the binding harness 

5. Apply power to the receiver with usb line or battery 

6. Power on transmitter ,both leds light,sumulator beginning 

LED Indication:

1. Solid illuminated Red LED is indicates good signal.  If flashing, 1 flash indicates 1 signal loss, 2 = 2 signal losses and etc....

2. The Orange LED on main receiver should flash one time when power if first applied.  It will flash several times when binding harness is connected.  It should stay illuminated if main receiver losses signal but the Satellite is still working.

3. The Orange LED on the Satellite will flash one time when power is first applied.  It will flash several times during binding process.  It will stay illuminated when satellite is functioning normally. 

Packing include:

Receiver 1 pcs,

satellite 1 pcs,

3P connect line 1pcs,

USB Power line 1 pcs,

Simulator connect line 1pcs,

bind plug 2 pcs.

Shipping

We ship worldwide.

Item will be shipped out 1-2 business days from Hong Kong by Standard Air Mail after full payment received.

Delivery time is approx. 7-12 business days to most destinations:

6-10days to Australia

8-14days to USA/ Canada

10-14days to major cities in Europe

3-4weeks to Italy

 

Terms & Conditions

All sales are final.

Payment must be made within 3 days after the end of the auction.

Buyers are responsible for additional COD charges, VAT, Customs fees, and Duty for importation (if any). We ONLY handle the shipping to you.

 

Warranty & Return Policies

Warranty: 7-day-warranty from the dispatched date. Please contact us through email before returning the defective item. Buyers are responsible for the returning shipping costs under any circumstances.

No refunds are offered. Only defective product will be offered exchange.

Return items should include the original packaging and accessories