Item specifics

Use:Vehicles & Remote Control Toys

Place of Origin:Guangdong China (Mainland)

is_customized:Yes

For Vehicle Type:Helicopters

Brand Name:OEM

Material:Plastic

RC Parts & Accs:Receivers

Plastic Type:PC

Model Number:S6100E

control distance:up to 600mProduct Description
MICROLITE DSM2 /DSMX Receiver 
 

Receiver Specifications:

1.Type:6-Channel and 1 SBUS output Full-Range DSM2 Receiver and 1 SBUS output
2.Modulation: DSM2 /DSMX Band: 2.4GHz
3.Dimensions (L xWx H):50x30x13mm
4.Weight: 8g
5.Voltage Range: 3.6-9.6v
6.Antenna Length Main RX: 30mm*2  

Key Features

6channels 1channels SBUS output
Preset failsafe system
Compatibility (Spectrum and JR DSM2 and DSMX): DX6I,DX7,DX8,DSX7,DSX9 DSX11,DSX12; 
 
Package including: Receiver *1 pcs, bind plug *1pcs

Binding Procedure
1. Put the binding harness into connector location marked BIND. Next apply power to the receiver. 

2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter.  

3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now. 

4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions.