4CH MICROLITE DSM2 /DSMX Receiver 



Receiver Specifications: 

1.Type: 4-Channel Full-Range DSM2 Receiver
2. Modulation: DSM2 /DSMX
3.Band: 2.4GHz Dimensions (L xWx H):29x16x7mm
4.Weight: 3g
5.Voltage Range: 3.6-10v
6.Antenna Length Main RX: 29mm  

Key Features
4 channels
Preset failsafe system
Compatibility (Spectrum and JR DSM2 and DSMX): DX6I,DX7,DX8,DSX7,DSX9 DSX11 

Package including:Receiver *1 pc, bind plug *1pc 


Binding Procedure 


1. Put the binding harness into the Channel marked BIND. Next apply power to the receiver. Receiver’s  LED should illuminate. 


2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter.   

 
3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now.   

4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions.