FC830A Intelligent Fast Ethernet Fiber Media Converters
Overview
HiOSO FC830A is an intelligent 10/100M adaptive fast Ethernet fiber media converter (also called optical-to-electrical medium converter). With its unique “link failure alert” function at both optical and electrical ends, this fast Ethernet fiber converter can completely replace the fiber converter of Network Management System (NMS) type and greatly reduce system cost.
FC830A can conduct mutual conversion between 10Base-T/100Base-TX twisted pair electrical signals and 100Base-FX optical signals.
HiOSO FC830A is an intelligent 10/100M adaptive fast Ethernet fiber media converter (also called optical-to-electrical medium converter). With its unique “link failure alert” function at both optical and electrical ends, this fast Ethernet fiber converter can completely replace the fiber converter of Network Management System (NMS) type and greatly reduce system cost.
FC830A can conduct mutual conversion between 10Base-T/100Base-TX twisted pair electrical signals and 100Base-FX optical signals.
FC830A extends the transmission distance of a network from 100m over copper wires to 120 Km, and uses two network transmission technologies (that is, the data link layer 2 storing & forwarding mode and the physical layer 1 straight-through mode) to implement data transmission between the optical and electrical network connection mediums. FC830A fiber converter supports transmission in dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fibers.
Features
- 10/100 Mbps adaptive, for the convenience of network upgrade;
- Efficient built-in switching core, to implement flow control and reduce broadcast packets;
- Supporting full-duplex and half-duplex transmission modes and capable of automatic negotiation;
- Supporting automatic crossing of twisted pair ports, for the convenience of system debugging and installation;
- Supporting Link Failure Alert (LFA);
- Supporting FX half-duplex/full-duplex transmission modes and link failure alert function;
- Supporting switch selection of 10/100Mbps storing & forwarding mode and 100Mbps straight-through transmission mode (unique);
- Supporting low-delay transmission;
- Supporting transmission of extra-long packets (with the maximum length of 1600 bytes);
- Supporting transmission of extra-long packets over VLAN;
- Supporting Quality of Service (QoS) and ensuring transmission of VoIP packets;
- Supporting Spanning Tree Protocol (STP) to form a redundant network;
- Extremely low power consumption (less than 2W), low heat and capable of stable operation for a long period time;
- Supporting multiple types of fiber ports such as dual-fiber multi-mode,dual-fiber single-mode and single-fiber single-mode, to satisfy the extended requirements of users.
Application
10/100Mbps fast optical Ethernet long-distance transmission network
10/100Mbps fast optical Ethernet long-distance transmission network
Technical Specifications
|
Parameters
|
Specifications
|
|
Access mode
|
10/100Mbps
|
|
Standard
|
IEEE802.3 10Base-T Ethernet, IEEE802.3u, 100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree
|
|
Wavelength
|
850nm/1310nm/1550nm
|
|
Transmission distance
|
Dual-fiber multi-mode: 2Km; dual-fiber single-mode: 25/40/60/80/100/120Km;single-fiber single-mode: 25/40/60/80/100Km
Category-5 twisted pairs: 100m |
|
Port
|
One RJ45 port: Connected to STP/UTP category-5 twisted pairs
One fiber port: Multi-mode – SC or ST (fiber size: 50,62.5/125μm) Single mode – SC/FC fiber port (fiber size: 9/125μm) Single-fiber single-mode – SC/FC fiber port (fiber size: 9/125 μ m) |
|
Conversion mode
|
Medium conversion, storing and forwarding/straight-through
|
|
MAC address table
|
I K
|
|
Buffer space
|
1Mbit
|
|
Flow control
|
Full duplex state: flow control; half-duplex state: back pressure mode
|
|
Delay
|
Storing & forwarding: 9.6 μ s; straight-through: 0.9 μ s;
|
|
Bit error rate
|
<1/1000000000
|
|
MTBF
|
100,000 hours
|
|
LED
|
POWER (power), FX LINK/ACT (fiber link/action)
FDX (FX full-duplex mode), TP LINK/ACT (twisted pair link/action) TP 100 (twisted pair: transmission rate of 100M); FX 100 (fiber: transmission rate of 100M) (external power) |
|
Power
|
DC5V 1A (external), AC220 0.5A/DC-48 (built-in)
|
|
Power consumption
|
<2W
|
|
Operating temperature
|
-10~55°C
|
|
Operating humidity
|
5%~90%
|
|
Storage temperature
|
-40~70°C
|
|
Storage humidity
|
5%~90% (non-condensing)
|
|
Dimensions
|
26mm(H)*71mm(W)*95mm(D) (height * width * depth) (external power)
26mm(H)*85mm(W)*135mm(D) (height * width * depth) (built-in power) 110mm(H)*22mm(W)*81mm(D) /(height * width * depth) (module card) |
Order Information
|
Model |
Rate (Mbps)
|
Mode
|
Working Wavelength
(nm) |
Distance
(Km) |
Port
|
Link
Alarm |
Power
|
|
FC830A-M2-SC/ST
|
10/100
|
Dual-fiber multi-mode
|
1310
|
2
|
SC/ST
|
Support
|
External DC5V/1A
|
|
FC830AP-M2-SC/ST
|
10/100
|
Dual-fiber multi-mode
|
1310
|
2
|
SC/ST
|
Support
|
Built-in
AC220V/DC-48V |
|
FC830AC-M2-SC/ST
|
10/100
|
Dual-fiber multi-mode
|
1310
|
2
|
SC/ST
|
Support
|
Module card DC5V
|
|
FC830A-S20/40/60
-SC/FC
|
10/100
|
Dual-fiber single-mode
|
1310
|
25/40/60
|
SC/FC
|
Support
|
External DC5V/1A
|
|
FC830A-S80/100/120
-SC/FC
|
10/100
|
Dual-fiber single-mode
|
1550
|
80/100/120
|
SC/FC
|
Support
|
External DC5V/1A
|
|
FC830AP-S20/40/60
-SC/FC
|
10/100
|
Dual-fiber single-mode
|
1310
|
25/40/60
|
SC/FC
|
Support
|
Built-in AC220V/DC-48
|
|
FC830AP-
S80/100/120-SC/FC
|
10/100
|
Dual-fiber single-mode
|
1550
|
80/100/120
|
SC/FC
|
Support
|
Built-in AC220V/DC-48
|
|
FC830AC-S20/40/60
-SC/FC
|
10/100
|
Dual-fiber single-mode
|
1310
|
25/40/60
|
SC/FC
|
Support
|
Module card DC5V
|
|
FC830AC-
S80/100/120-SC/FC
|
10/100
|
Dual-fiber single-mode
|
1550
|
80/100/120
|
SC/FC
|
Support
|
Module card DC5V
|
|
FC830AS-S20/40/
60/80/100-SC
|
10/100
|
Single-fiber single-mode
|
WDM 1310/1550
|
25/40/
60/80/100
|
SC
|
Support
|
External DC5V/1A
|
|
FC830APS-S20/40/
60/80/100-SC
|
10/100
|
Single-fiber single-mode
|
WDM 1310/1550
|
25/40/
60/80/100
|
SC
|
Support
|
Built-in AC220V/DC-48V
|
|
FC830ACS-S20/40
/60/80/100-SC
|
10/100
|
Single-fiber single-mode
|
WDM 1310/1550
|
25/40/
60/80/100
|
SC
|
Support
|
Module card DC5V
|