Steel Pipe Plasma Cutting Machine LHXG-3
Application:
LHXG-3 is specialized in steel pipe cutting, Can cut in several different directions and different diameters of cylindrical intersecting line holes, cylindrical intersecting line end at the pipe axis end, Can cut the pipe welded on the elbow, "shrimp joined, pipe square hole on the waist-shaped hole , Variable angle to cut the groove surface and so on.
Technique Features:
1. The model is suitable for flame and plasma cutting method.
Application:
LHXG-3 is specialized in steel pipe cutting, Can cut in several different directions and different diameters of cylindrical intersecting line holes, cylindrical intersecting line end at the pipe axis end, Can cut the pipe welded on the elbow, "shrimp joined, pipe square hole on the waist-shaped hole , Variable angle to cut the groove surface and so on.
Technique Features:
1. The model is suitable for flame and plasma cutting method.
2. Cutting thickness and cutting speed we refer to the metal plate cutting.
3. Control system for LHXG-3: IPC
4. Working environment: T:-5-40C, Humidity: Less than 90%
5. Panasonic servo motor, German Gear case, Taiwan ABBA Linear Guide, French Schneider Switch.
6. Minimum and maximum diameter: 60-1000mm.
1. Can cut in several different directions and different diameters of cylindrical intersecting line holes to meet the condition of eccentric and non-eccentric vertical intersecting of competent axis and Pipe axis.
2. Can cut cylindrical intersecting line end at the pipe axis end. To meet eccentric and non-eccentric vertical and incline intersecting of competent axis and Pipe axis.
3. Cut the pipe end can be inclined cutting face.
4. Can cut the pipe welded on the elbow, "shrimp joined" at both ends of oblique cut surface.
5. Intersects with the circular cutting head to the branch ends intersecting line.
6. Variable angle to cut the groove surface.
7. Can cut the pipe square hole on the waist-shaped hole.
8. Steel can be cut off.
Parameters:
Parameters:
|
Control system
|
IPC
|
|
Diameter of steel pipe
|
60mm-1000mm
|
|
Cutting length
|
6000mm(Can be lengthened as user’s demand)
|
|
Effective cutting length
|
5000mm
|
|
Beveling Function
|
Yes
|
|
Axis
|
6 axis,5 axis or 4 axis
|
|
Drive motor
|
Stepper motor
|
|
Plasma power source
|
According to the plasma power
|
|
Plasma cutting torch
|
1 set
|
|
Automatic ignition
|
1 set
|
|
Drive software
|
1 set
|
|
Nesting software
|
FASTCAM INTEGNPS,SMARTNEST
|
|
Cutting speed
|
0-3500mm/min
|
|
Moving precision
|
0.01mm/step
|
|
Drawing software
|
AutoCAD, Solid works
|
|
Data transmission way
|
USB
|
|
Torch height
|
230mm
|
|
Speed error
|
±0.05
|
|
Weight
|
4.2T
|
|
Measure
|
3.8CBM
|
|
Working environment
|
Temp:-5-40C,humidity:Less than 90%
|
|
Power supply
|
AC 220V/380V 50/60Hz 1000W
|
|
Weight
|
4.2T
|
|
Measure
|
3.8CBM
|