Overview
 

HiOSO FOWAY8000N series cascaded (8-node) digital video optical transceiver adopts uncompressed digital video transmission, which combines TDM (Time Division Multiplexing) technique and ADM (Add/Drop Multiplexer) technique. 8～10 nodes cascaded optical transceiver adopts 1.25G optical transmission platform, simultaneously transmitting 8～10 channels video signal in one fiber. It supports at least 8～10 nodes and 1～4 channels video. Local equipment can real-time transmit 8～10 channels video.

 

Cascaded optical transceiver adopts modularization design; and supports function extending. The remote transceiver can supply 2 channels RS-485/422 shared data and 2 channels independent channel point-to-point data/audio signal. Each remote transceiver or local transceiver can transmit multi-channel audio, data and contact closure signal through adding audio/data extending board.

 

Cascaded optical transceiver supports optical chain protection (optional), which can automatically isolate fault node, ensuring other node transceivers work normally. It can also be configured with network management plug, to implement network management function of remote and local transceivers.

 

It is now widely used in security monitoring and control system, highway, Traffic Control Photographic System, automation and intelligent residence.

 

 

Character
 

Industrial-level design with SMT techniques

Full digital transmission in fiber, multi-service flexible configuration on the same platform

Supply desktop and integrated card type

Based on large scale integrated circuit

Transmission in single-fiber, dual-fiber is optional

Fully compatible with PAL/NTSC/SECAM

Support asynchronous data (positive/reverse), transmission rate is up to 115.200Kbps

Support RS232, RS422, RS485 or Manchester code

Support SNMP

Carrier class centralized network management

 

Technical specification
 

Fiber port                                         

Port                     FC/SC/ST optional

Wavelength              Single-mode1310nm/1550nm

Multi-mode 850nm/1310nm

Transmission power      -8∽-4dBm

Receiving sensitivity      <-23dBm(bit error rate<10^-11)

Transmission distance    Single-mode 20/40/60/80/100Km

Multi-mode 220m/550m

 

Video

Signal type                       PAL/NTSC/SECAM

Nominal input/output level         1Vp-p

Nominal input/output impedance    75Ω

Bandwidth per channel             6.5 MHz

Sample frequency                 13.5MHz

Quantization                      8bit

Connector                        BNC interface

 

Audio

Bandwidth per channel             20Hz~20K Hz

Sample frequency                 48K Hz

Quantization                      24bit

THD (Total Harmonic Distortion)     0.1% (typical value)

Audio connector                   RJ45 interface/ phoenix

 

 

Asynchronous data

Connector              RS232/RS485/RS422/ Manchester code

Working mode          Full/Half Duplex

Data rate               115.200Kbps

Bit error rate            <1×10^-9

Data connector          RJ45 interface/ phoenix

 

Ethernet

Standard               IEEE802.3, IEEE802.3u

Working mode          10/100M adaptable, Full/Half Duplex

Connector              RJ45 interface/ phoenix

 

Contact closure

Number of channels     1 channel

Working mode          set open/shorted circuit alarm

Connector              RJ45 interface/ phoenix

 

Operating environment

Power supply              input AC220V/DC-48V; output DC5V

Power consumption         < 5W

Operating temperature      -40℃-75℃

Storage temperature        -40℃-+85℃

Relative humidity           95%

 

Dimension

199mm×159mm×44mm

 

Order information