Lipolaser Slimming HKS902B Equipment hot for sale, Proviede by gold supplier professional use at home be safety!!!
Laser wave length |
635-650nm
|
Maximum output power |
400W
|
Single Output |
100MW
|
Numbers of Treatment Probe |
8
|
Numbers of Diode laser |
62
|
Timer
|
30minutes MAX |
Input current |
240v or 110V AC |
Working Temperature |
10-40degree
|
Weight:
|
21Kg
|
Package size |
58*50*33cm
|
Certifications
|
CE LVD,CE EMC |
The Laser emits low levels laser energy, the fat cell membranes are disrupted releasing intra-cellular fat. This causes the cell to lose its round shape by changing the permeability of the cell membrane. This does not affect the neighboring structures such as skin, blood vessels, and peripheral nerves.
Triglycerides spill out from the broken cell membranes and are released into the interstitial space, where they are slowly transported through the body’s natural metabolic functions, with no adverse physiological effects and are used by the body as an energy source. This mechanism of action is not “liquefaction of fat” rather, it is the instant empying out of the cells rather than the destruction of them. (referred to as lypolysis)
1. You will have six large Diode Laser paddles placed on the targeted fatty areas and secured with straps.
2. Then two smaller Probe Lasers will be placed over the appropriate lymphatic glands and held in place.
3. The Laser Lipo BCS will then be switched on for 10 minutes, re-located and turned on for another 10 minutes, this will be repeated one more time.
4. The treated area will now be re-measured to assess the inch-loss achieved. You can expect to see a reduction of between 0.5 and 3 inches.(1.25 and 8cm’s).
5. In order to increase the body’s ability to remove the Triglycerides (the broken down fat cells), it is necessary to assist this natural process by increasing the metabolic rate. This can be achieved in a number of ways but they all involve some form of exercise. We recommend the use of a vibration plate machine for about 10 minutes.