One-piece cast iron machine bed and one piece cast iron bridge yield in highest rigidity for precise machining results. The frame, stress-relieving designed, provides a stable performance of the machine.
The whole structure was analyzed by CAE to optimize rigidity and precision.
Preload roller linear guide ways with P grade allow max. loading but with a lower friction coefficient (0.003-0.006). It supplies smooth running thanks to optimized roller recirculation and guidance, saving energy consumption.
C3 grade double nut ball screws provide precise cutting, even for heavy loads.
A two stage gear box with a 26 KM motor generate 544Nm torque for powerful cutting, thus reducing machining time.
A coil chip conveyor on both sides of the work table remove the chips effectively. The conveyor screw mounting in embedded into the cast iron machine bed.
The whole structure was analyzed by CAE to optimize rigidity and precision.
Preload roller linear guide ways with P grade allow max. loading but with a lower friction coefficient (0.003-0.006). It supplies smooth running thanks to optimized roller recirculation and guidance, saving energy consumption.
C3 grade double nut ball screws provide precise cutting, even for heavy loads.
A two stage gear box with a 26 KM motor generate 544Nm torque for powerful cutting, thus reducing machining time.
A coil chip conveyor on both sides of the work table remove the chips effectively. The conveyor screw mounting in embedded into the cast iron machine bed.