Product Main

Specifications

 JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability.
  • Qualifications:
  • • PCD: MF RC500, RC531, RC632, RC400
  • • Working frequency: 13.56MHz
  • • Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
  • • RF standard: ISO14443A, ISO14443B, ISO15693
  • • Operating distance: 100mm(depending on card and antenna design)
  • • Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
  • • EEPROM: 512 Bytes
  • • Interface: IIC & UART (selected by SPS pin, recommend to use IIC)
  • • Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps
  • • Max.command length: 511 Bytes
  • • Interface level: 3.3V(TTL level; 5V tolerance)
  • • Power supply: DC 5.0V
  • • Power consumption: 70mA
  • • Dimension: 42mm×21mm×8mm
  • • Package: DIP32
  • • Weight: about 15g
  • • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
  • • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
  • • ISP: Supported
  • • RoHS: Compliant
  • • SDK&Program: download
  • • Manual: download
Model NO. JMY505M JMY505A JMY505C JMY505G JMY505H JMY505D JMY505E
Manual Download Download Download Download Download Download Download
Dimension 42mm×21mm×8mm
Interface UART/IIC select by users
Communication Command Length 72 bytes 254 bytes 511 bytes
Antenna connection 50ohm coaxial line separate
MCU P89LPC931 P89LPC932A1 P89LPC936 P89LPC932A1 P89LPC936
PCD RC500 RC531 RC400 RC632 RC500 RC531
RF Standard ISO14443A
ISO14443A
ISO14443B
ISO15693
ISO14443A
ISO14443B
ISO15693
ISO14443A
ISO14443A
ISO14443B
Reading distance 100mm
PICC
 
Mifare 1K
Mifare 4K
FM11RF08
Ultralight
Ultralight C
Mifare Mini
 
Mifare 1K
Mifare 4K
FM11RF08
Ultralight
Ultralight C
Mifare Mini
DesFire
Mifare ProX
T=CL TYPE A
 
Mifare 1K
Mifare 4K
FM11RF08
Ultralight
Ultralight C
Mifare Mini
DesFire
Mifare ProX
T=CL TYPE A
 
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
AT88RF020
T=CL TYPE B
 
NXP I.CODE SLI
TI Tag_it HF-I
ST LRI
 
Mifare 1K
Mifare 4K
FM11RF08
Ultralight
Ultralight C
Mifare Mini
DesFire
Mifare ProX
T=CL TYPE A
 
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
AT88RF020
T=CL TYPE B
 
NXP I.CODE SLI
TI Tag_it HF-I
ST LRI
 
Mifare 1K
Mifare 4K
FM11RF08
Ultralight
Ultralight C
Mifare Mini
DesFire
Mifare ProX
T=CL TYPE A
 
Mifare 1K
Mifare 4K
FM11RF08
Ultralight
Ultralight C
Mifare Mini
DesFire
Mifare ProX
T=CL TYPE A
 
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
AT88RF020
T=CL TYPE B


Antenna connects to the module by 50ohm coaxial line.
TX600, size: 70mm*70mm, 90mm reading range
TX601, size: 50mm*50mm, 70mm reading range
TX602, size: 30mm*30mm, 60mm reading range
Any requirements is available.