Introduction of vertical compound crusher:
Vertical Compound Crusher is developed by combining the pre-breakage technology of domestic and foreign countries, and optimizing the key structure parameters. It is designated mainly for grinding of cement raw materials (limestone) and cement clinker in cement factories. Thus, a kind of ideal secondary breakage equipment is provided for technology innovation or new production line building in cement factories. It can be used for grinding middle hard ores such as iron ore, aluminum ore, grit stone, gypsum, blast furnace slag, coal gangue, phosphorus ore, and lump coal. Also, it can be used in the field of building materials, mining industry, metallurgy, coal and chemical industry.
Vertical Compound Crusher is developed by combining the pre-breakage technology of domestic and foreign countries, and optimizing the key structure parameters. It is designated mainly for grinding of cement raw materials (limestone) and cement clinker in cement factories. Thus, a kind of ideal secondary breakage equipment is provided for technology innovation or new production line building in cement factories. It can be used for grinding middle hard ores such as iron ore, aluminum ore, grit stone, gypsum, blast furnace slag, coal gangue, phosphorus ore, and lump coal. Also, it can be used in the field of building materials, mining industry, metallurgy, coal and chemical industry.
Features of vertical compound crusher:
1. The production capacity is big.
2. The crushing ration is high and the power consumption is low.
3. The seal ability is good and machine running is stable.
4. The maintenance is simple
1. The production capacity is big.
2. The crushing ration is high and the power consumption is low.
3. The seal ability is good and machine running is stable.
4. The maintenance is simple
Application of vertical compound crusher:
Vertical compound crusher is a kind of new fine and coarse crushing equipment, which is developed according to purified parameter based on the crushing technology at home and abroad. The vertical combination crusher is mainly used for crushing cement raw materials and clinker for middle-size cement plants, which is a kind of ideal fine crushing equipment in the technical reform or construction of production line of cement plants. The vertical combination crusher is also applicable for crushing such hard and medium hard materials as iron ore, gravel, gypsum, slag, gangue and lump coal. It has the advantages of big crushing proportion, less energy consumption, stable running, easy operation and maintenance, etc.
Vertical compound crusher is a kind of new fine and coarse crushing equipment, which is developed according to purified parameter based on the crushing technology at home and abroad. The vertical combination crusher is mainly used for crushing cement raw materials and clinker for middle-size cement plants, which is a kind of ideal fine crushing equipment in the technical reform or construction of production line of cement plants. The vertical combination crusher is also applicable for crushing such hard and medium hard materials as iron ore, gravel, gypsum, slag, gangue and lump coal. It has the advantages of big crushing proportion, less energy consumption, stable running, easy operation and maintenance, etc.
Work principle:
The motor drives the rotor that fixed on the main bearing to run quickly toward certain direction when the machine works. The materials are fallen into the throw-up disc and impacted by the high speed strips of the throw-up disc, and then strikes with the impact board under the effect of Centrifugal Force.Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats. The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. In this way, the materials go through up, middle, and down rotor crushing rooms and crushed, pressed, and ground by the hammers and the impact boards, and finally the materials are gradually crushed into needed sizes and come out.
The motor drives the rotor that fixed on the main bearing to run quickly toward certain direction when the machine works. The materials are fallen into the throw-up disc and impacted by the high speed strips of the throw-up disc, and then strikes with the impact board under the effect of Centrifugal Force.Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats. The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. In this way, the materials go through up, middle, and down rotor crushing rooms and crushed, pressed, and ground by the hammers and the impact boards, and finally the materials are gradually crushed into needed sizes and come out.
Main Technical Parameters:
|
Model
|
Feeding size (mm)
|
Discharging size (mm)
|
Production capacity (t/h)
|
Rotational epeed (r/min)
|
Motro power (kw)
|
Overall dimension(mm)
|
|
PFL-800
|
＜100
|
＜3-5 60-90%
|
10-20-
|
934
|
22
|
2100×1200×1700
|
|
PFL-1000
|
＜120
|
＜3-5 60-90%
|
20-40
|
769
|
45
|
2600×1400×1900
|
|
PFL-1250
|
＜150
|
＜3-5 60-90%
|
40-70
|
530
|
75
|
2800×1600×2100
|
|
PFL-1500
|
＜180
|
＜3-5 60-90%
|
70-100
|
495
|
132
|
3100×1900×2200
|
|
PFL-1750
|
＜200
|
＜3-5 60-90%
|
130-190
|
424
|
160
|
3710×2360×2390
|
|
PFL-2000
|
＜220
|
＜3-5 60-90%
|
100-160
|
370
|
185
|
4100×2660×2620
|
Note: The technical parameters above are just for your reference. If there is any change, all parameters and overall dimension are subject to operating instructions. Any questions please feel free to contact us.