Ⅰ:Introduction
The HDMI to 3G SDI converter allows HDMI signals to be shown on SDI displays while ensuring high bit rates of 2.970 Gbit/s to give you high resolution signal without any loss. For professionals this means that it is now easier to convert your high def HDMI signal with audio to 3G SDI for long distance transmission and display your work on two 3G SDI display.
Ⅱ: Applications
HDMI signal display on SDI display(s)
Extending HDMI signal over 100M away to two SDI display
Cascade HDMI signal over SDI cable
Ⅲ: Features
Supports HDMI timing: 480i, 576i, 720p50/60, 1080p 24/25/30, 1080i 50/60, 1080p 50/60
Operation at 2.970Gbps, 2.970/1.001Gbps, 1.485Gbps, 1.485/1.001Gbps and 270Mbps
Simultaneous display HDMI source on two SDI displays
Integrated audio embedded up to 8CH PCM 48kHz for HDMI
Auto video mode detection (3G/SD/HD)
Connect with other units (SDI to HDMI) to extend your signal over long distances
Supports signal transmission distances up to 300M for SD signals, 200 for HD signals and 100M for 3G signals
Note: Cable tested with Belden 1694A. Operating distances may vary if used with another type of cable.
Ⅳ: Package
HDMI to 3G SDI Box-----------------------------1PCS
5V DC Power Supply Adaptor-----------------1PCS
Operation Manual---------------------------------1PCS
V: Specification
|
SDI Transmission
Rates
|
2.970 Gbps and 2.970/1.001 Gbps 1.485 Gbps, 1.485/1.001Gbps and 270 Mbps
|
|
Frequency Bandwidth
|
225MHz/link (HDMI 1.3)
|
|
In/Output Support
Resolution
|
480i, 576i, 720p@50/59.94,60
1080i@50/59.94/60
1080p@23.98/24/25/29.97/30/50/59.94/60
|
|
Input Port
|
1 x HDMI
|
|
Output Port
|
2 x BNC (SDI/HD-SDI/3G-SDI)
|
|
Power Supply
|
5V DC/ 2A
|
|
ESD Protection
Human body model
|
±8kV (air-gap discharge)
±4kV (contact discharge)
|
|
SDI Cable Distance
|
3G up to 100M (BELDEN 1694A)
HD up to 200M (BELDEN 1694A)
SD up to 300M (BELDEN 1694A)
|
|
Dimension (mm)
|
100(W) x65(D) x 25(H) mm
|
|
Weight (g)
|
250g
|
VI: Operation Controls and Functions
Front Panel Rear Panel
(1) DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet. The red LED will turn on when the power is on.
(2) Power LED: This red LED will switch on when the device is connected with the power supply.
(3) HDMI In: This slot is to connect with the input source equipment such as DVD or Blue-ray player with connection cable for input video and audio signal transmission. Or it can also be connect with DVI source equipment for video signal transmission.
(4) 3G SDI Out 1: Connect output SDI display or with SDI to HDMI converter to cascade the signal as long as desired.
(5) 3G SDI Out 2: Connect output SDI display or with SDI to HDMI converter to cascade the signal as long as desired.