Plastic Injection Machine (HTW90)
| SPECIFICATION | HTW90 | ||||
| A | B | C | D | ||
| INJECTION UNIT | |||||
| Screw diameter | mm | 30 | 32 | 35 | 38 |
| Screw L/D ratio | L/D | 23.5 | 22 | 20.1 | 18.5 |
| Shot volume(theoretical) | cm3 | 117 | 133 | 158 | 187 |
| Injiection weight(ps) | g | 106 | 121 | 144 | 170 |
| Injection rate | g/s | 71 | 81 | 97 | 115 |
| Injection pressure | Mpa | 230 | 203 | 170 | 144 |
| Screw pressure | rpm | 225 | |||
| CLANPING UNIT | |||||
| Clamping force | kN | 900 | |||
| Open stroke | mm | 320 | |||
| Space between tie bars(W×H) | mm | 355×330 | |||
| Max.Mold height | mm | 350 | |||
| Min.Mold height | mm | 150 | |||
| Ejector stroke | mm | 90 | |||
| Ejector force | kN | 30 | |||
| OTHERS | |||||
| Max.Pump pressure | MPa | 16 | |||
| Pump motor power | kW | 11 | |||
| Heating power | kW | 7.55 | |||
| Machine dimension(L×W×H) | m | 3.38×1.19×1.77 | |||
| Oiltank cubage | L | 160 | |||
| Machine weight | t | 2.8 | |||