Plastic Injection Machine (HTW200-JC)
| ITEM | UNIT | A | B | C |
| INJECTION UNIT | ||||
| SCREW DIAMETER | mm | 45 | 50 | 55 |
| SCREW L/D RATIO | L/D | 23.3 | 21 | 19.1 |
| SHOT VOLUME(THEORETICAL) | cm3 | 340 | 420 | 510 |
| INJECTION WEIGHT(PS) | g | 310 | 383 | 466 |
| INJECTION RATE | g/s | 124 | 154 | 186 |
| INJECTION PRESSURE | Mpa | 207 | 168 | 139 |
| SCREW SPEED | rpm | 155 | ||
| CLAMPING UNIT | ||||
| CLAMP FORCE | Kn | 2000 | ||
| OPEN STROKE | mm | 475 | ||
| SPACE BETWEEN TIE BARS(W*H) | mm | 530*530 | ||
| MAX.MOULD HEIGHT | mm | 530 | ||
| MIN.MOULD HEIGHT | mm | 200 | ||
| EJECTOR STROKE | mm | 140 | ||
| EJECTOR FORCE | kn | 70 | ||
| OTHERS | ||||
| MAX.PUMP PRESSURE | Mpa | 16 | ||
| PUMP MOTOR POWER | Kw | 18.5 | ||
| HEATING POWER | Kw | 13.6 | ||
| MACHINE DIMENSION(L*W*H) | m | 5.22*1.57*2.21 | ||
| OILTANK CUBAGE | L | 300 | ||
| MACHINE WEIGHT | t | 7 | ||