WM Series Lightning Protective and Surge Immunity
High Performance Transducers
More PROTECTIVE
GOOD EMC PERFORMANCE
CE and RoHS conformance
Features Summary
WM Series protective Electrical Transducers / Sensors are special made Separation modules which have more enhanced EMC circuitry design and lightning-protection design to provide customers with better working performance. These series transducers which are featured with high accuracy, high voltage insulation, broadened bandwidth, big operating temperature range, small temperature drifting and low power consumption, and can be used in hazardous environment.
Applications
These series product lines are suitable application for real-time measurement & monitoring of all kinds of power equipment, air-conditioning units in telecom station to secure the telecom system working normally. And the Products are also suitable application for signal measurement and monitoring of industrial field control.
Main Technical Index
|
Over load capacity
|
AC current input (H) : 10 times of nominal input value; hold for 1 second; stop 10 seconds; can repeat 10 times
AC current input (F; R-3-phase): 20 times of nominal input value; hold for 1 second,; stop 300 seconds, can repeat 5 times
|
|
AC voltage input : 2 times of nominal input value; hold for 1 second; stop 10 seconds; can repeat 10 times
|
|
|
Linear range
|
0%-120%
|
|
Frequency
|
25Hz-5KHz
|
|
accuracy
|
0.2%; or 0.5%
|
|
Load capacity
|
Smaller than 500Ω or 300Ω
|
|
Response Time
|
200ms to 300ms
|
|
Thermal Drift
|
350ppm
|
|
Output ripple
|
Smaller than 10mV
|
|
Isolation Voltage
|
DC 2500V; AC 2000V (for surge immunity)
|
|
Operating Temperature
|
-25°C - +70°C
Relative Humidity: ≤95%; no water condensation
|
|
Regulation agencies followed
|
EN 61326:2006; EN60100:2001; IEC61000-4-5;IEC61000-4-2
|
o AC Current transducers
o WMI414F21-S/WMI412F21-S
o single phase, available in case style F : Ø 20mm
Input AC 30A---to 400A
output 4-20mA; 0-5V; 0-10V
Supply power DC 12V, 24V
Input to Output isolated
o WMI414H25/WMI414H29/WM412H25/WMI414H29
o Input to Output to Power Supply Isolated, available in case style H
o Input AC 1A---5A
output 4-20mA; or 0-5V; or 0-10V; or 1V- 5V
Supply power DC 12V, 0r 24V; or AC/DC 85V—265V
o WM3I414R01-S (3-PHASE)
o Input to Output isolated; loop powered; three-phase, available case style R
o Input AC 1A;2A;3A;5A
Output 4-20mA
Supply power DC 12V, 0r 24V;
o AC Voltage transducers
o WMV412H25/WMV414H25/WMV414H29/WMV412H29
o Input to Output to Power Supply Isolated, Available in Case Style H
o Input AC 10V---500V;
output 4-20mA; or 0-5V; or 0-10V; or 1V- 5V
Supply power DC 12V, 0r 24V; or AC/DC 85V—265V
o WM3V414R01-AS (3-PHASE)
o Loop Powered, three-phase, available in case style R
o Input AC 300V;500V
Output 4-20mA
Supply power DC 12V, 0r 24V;
o DC Voltage Transducers
o WMV144H21-AS
o Adopt Photoelectric Isolation Principle, Input to Output to Supply Power isolated, available in case H
o Input DC 100mV; 70V
Output 4-20mA
Supply power DC 12V, 0r 24V;
Model Selection Table
A. AC Current Transducers / Sensors
|
Model No.
|
Input
|
Output
|
Power
Supply
|
Response
Time (ms)
|
Remarks
|
Case
Structure
|
|
WMI412H25
|
AC 0.1A;
0.5A;
1A……5A
|
DC 0-5V;
0-10V;
1-5V;
|
DC
+12V;
+24V
|
200
|
Input/output / power supply Isolation
|
H2
|
|
WMI412H29
|
AC 0.1A;
0.5A;
1A……5A
|
DC
0-5V
0-10V
1-5V
|
AC/DC
85V-265V
|
200
|
Input/output / power supply Isolation
|
H2
|
|
WMI414H25
|
AC 0.1A;
0.5A;
1A……5A
|
DC
4-20mA
0-20mA
|
DC
+12V;
+24V
|
200
|
Input/output / power supply Isolation
|
H2
|
|
WMI414H29
|
AC 0.1A;
0.5A;
1A……5A
|
DC
4-20mA
0-20mA
|
AC/DC
85V-265V
|
200
|
Input/output / power supply Isolation
|
H2
|
|
WMI414F21-S
|
AC
30A;
50A;
80A…
400A
|
DC
4-20mA
|
DC
+12V;
+24V
|
300
|
Surge-
Protection
Circuit
|
F2
|
|
WM3I414R01-S
|
AC 1A; 5A;
|
DC
4-20mA
|
DC
+12V;
+24V
|
300
|
Surge Immunity
|
R
|
B. DC Voltage Transducers / Sensors
|
Model No.
|
Input
|
Output
|
Power
Supply
|
Responding
Time
|
Remarks
|
Case
Structure
|
|
WMV144H21-AS
|
DC
100mV
70V
|
DC
4-20mA
|
DC
+12V;
+24V
|
250
|
Lightning
Protection
Anti -Surge
|
H2
|
C. AC Voltage Transducers / Sensors
|
Model No.
|
Input
|
Output
|
Power
Supply
|
Responding
Time (ms)
|
Remarks
|
Case
Structure
|
|
WMV412H25
|
AC10V…500V;
|
DC
0-5V
0-10V
1-5V
|
DC
+12V
+24V
|
200
|
Input/output / power supply Isolation
|
H2
|
|
WMV412H29
|
|
AC/DC
85V-265V
|
200
|
Input/output / power supply Isolation
|
H2
|
|
|
WMV414H25
|
DC
0-20mA
4-20mA
|
DC
+12V
+24V
|
200
|
Input/output / power supply Isolation
|
H2
|
|
|
WMV414H29
|
DC
0-20mA
4-20mA
|
AC/DC
85V-265V
|
200
|
Input/output / power supply Isolation
|
H2
|
|
|
WM3V414R01-AS
|
300V;500V;
|
DC
4-20mA
|
DC
+12V
+24V
|
300
|
Input to output isolated;
Anti lightning, and surge immunity
|
R
|