JBQ mud agitator is to keep uniformity of the drilling fluid and prevent the deposition of the solid particles in the pot-type cyclic system to guarantee the stable performance of the drilling fluid.
Structure:
The mud agitator is composed by explosion-proof electric machine, reducer,engine base and impeller components. The electric machine ,reducer and impeller
shaft are connected with each other by solid couplings. 4 leaf blades were welded on each impeller.
shaft are connected with each other by solid couplings. 4 leaf blades were welded on each impeller.
Operating principles:
The impeller can stengthen the stirring effect by making vortex of the drilling fluid. The tray installed between the leaf
blades can prevent the deposition of the solid particles when the machine stopped, thereby, to reduce the moment
of resistance inflicted by the sediment to the impellers when restart the equipment, therefore, to avoid burnout of the
machine.
blades can prevent the deposition of the solid particles when the machine stopped, thereby, to reduce the moment
of resistance inflicted by the sediment to the impellers when restart the equipment, therefore, to avoid burnout of the
machine.
Type
|
JBQ2.2
|
JBQ5.5
|
JBQ7.5
|
JBQ11
|
JBQ15
|
Power
|
2.2KW(3.0hp)
|
5.5KW(7.5hp)
|
7.5KW(10hp)
|
11KW(15hp)
|
15KW(20hp)
|
Rotate speed
|
60r/min
|
60r/min
|
60r/min
|
60r/min
|
60r/min
|
Shaft length
|
Decided by the depth of the tank.
|
||||
Number of impeller layers
|
Two layers or monolayer
|
||||
Impeller diameter
|
Decided by the inside diameter of the tank.
|
||||
Remarks
|
If the length of impeller shaft is beyond 1800mm, Centralizer set is required.
|