Essential parameters:
Input voltage: AC100V～240V
Light decline: 6000h <6%
Work environment: -20℃ ～ +40℃
Beautiful appearance: ultrathin design, space-saving, light softness and good for decoration.;
Excellent light effect: soft light without glare;
3．Fast heat dissipation:high thermal conductivity aluminum shell ensure fast heat dissipation;
4．Efficient and energy saving: adopts efficient isolated power supply and conversion efficiency is above 89%, power factor is above 0.92. Compared with traditional incandescent light, our led down light cam save 80% power.
5．Good electrical performance:wide input voltage and frequency range; work without strobe ,;fast transient response ( no delay); no damage frequently switch and input voltage fluctuation; no UV radiation; no interference
6．Environment friendly: no harmful substances, no UV radiation;
7．Low light decline: in 1000 hours aging test, light decline is less than 3%;
8．Convenient mounting: ceiling.
Housing is made of high-purity aluminum anodizing after processing which is elegant and stylish. Good thermal management controls light attenuation effectively.
Perfect optical design ensures soft and even light. Instant lighting, no flickering,no glaring. Free of lead, mercury and other harmful substances. This product is widely used in shopping mall, hotel, restaurant and etc.
Only qualified electrician is allowed to do the installation, maintenance and inspection for safety concern. It is dangerous for non-professional operator.
Ceiling-installation only.
Do not install the product in high temperature or humid place.
75mm space should be left around the product for ventilation, no cover on the light at any time.
1. Turn off the power.
2. Drill a suitable mounting hole on ceiling according to size requirement of different item.
3. Connect input end of LED converter to power (110V-220V), and make sure connecting way is right.
4. Put LED driver at suitable place on ceiling.
5. Pinch both springs (showed as ), then push light into installation hole ( showed as ). Make sure the light fixed well.
6. Re-check everything was connected well, then turn on the power.