Not like voice-control switch, it turns on even if weak voice.

As infrared auto-control product, it control current load by monitoring

Mobile infrared spectroscopy of human body.  The lamp turns on when human approaches and it turns off when leaving.  It can also monitor day and

Night ( turn on in the day and turns off at night).

2．Function & Feature:

 2.1: Auto induction: It turns on when human approaches and it turns off when

Leaving.
 2.2: Auto light-monitor: It monitor weak or strong light by using sensitive component. The switch is off constantly in the daylight and when strong light can not stimulate circuit.
 2.3: Auto built-in time-delay: The switch keeps turning on when human approaches the induction range during auto time-delay.  It turns off when human leave.

  Infrared human sensor switch can be used at: school, hotel, hospital, dormitory, Corridor, elevator, balcony, bathroom, storage, basement, garage.

4, Technical data:
1, input voltage: AC100-265V  50Hz

Within 20 seconds to 300 seconds)
4, Load power: ( 4-line connect, 2-line input, 2-line output) loads less than

≤200W. ( P.S: 2 red lines is input AC-IN; 2 white lines is output AC-OUT).

5, induction distance: 5～10 meters(distance will be short when temperature is up)
6, induction angle: ≤140°
7, beam angle: Less than 5 LUX, the lamp will turn on after monitoring human body. More than 8-10 LUX, it will turn off.

   6.1: white box size: 110*110*38mm

    6.2: carton size: 560*460*200