Plastic Injection Machine (HTW250-F)
| HTF250 PLASTIC INJECTION MACHINE | ||||
| ITEM | UNIT | A | B | C |
| INJECTION UNIT | ||||
| SCREW DIAMETER | mm | 42 | 45 | 50 |
| SCREW L/D RATIO | L/D | 23.6 | 22 | 23.1 |
| SHOT VOLUME(THEORETICAL) | cm3 | 324.9 | 373 | 454.5 |
| INJECTION WEIGHT(PS) | g | 296 | 339 | 414 |
| INJECTION RATE | g/s | 188.2 | 216 | 187.6 |
| INJECTION PRESSURE | Mpa | 287 | 250 | 204.5 |
| SCREW SPEED | rpm | 280 | 190 | |
| CLAMPING UNIT | ||||
| CLAMP FORCE | Kn | 2500 | ||
| OPEN STROKE | mm | 525 | ||
| SPACE BETWEEN TIE BARS(W*H) | mm | 538*520 | ||
| MAX.MOULD HEIGHT | mm | 550 | ||
| MIN.MOULD HEIGHT | mm | 200 | ||
| EJECTOR STROKE | mm | 130 | ||
| EJECTOR FORCE | kn | 70 | ||
| OTHERS | ||||
| MAX.PUMP PRESSURE | Mpa | 16 | ||
| PUMP MOTOR POWER | Kw | 37 | ||
| HEATING POWER | Kw | 18.3 | ||
| OILTANK CUBAGE | L | 560 | ||