Plastic Injection Molding Machine (HTW500-F) is a kind of high efficiency, accuracy, reliability equipment with advanced technology.
Parameters of Plastic Injection Molding Machine:
| ITEM | UNIT | A | B | C |
| INJECTION UNIT | ||||
| SCREW DIAMETER | mm | 75 | 80 | 85 |
| SCREW L/D RATIO | L/D | 22.7 | 21 | 20 |
| SHOT VOLUME(THEORETICAL) | cm3 | 1727 | 1965 | 2218 |
| INJECTION WEIGHT(PS) | g | 1560 | 1788 | 2018 |
| INJECTION RATE | g/s | 386 | 442 | 499 |
| INJECTION PRESSURE | Mpa | 191 | 168 | 148 |
| SCREW SPEED | rpm | 130 | ||
| CLAMPING UNIT | ||||
| CLAMP FORCE | Kn | 5000 | ||
| OPEN STROKE | mm | 770 | ||
| SPACE BETWEEN TIE BARS(W*H) | mm | 820*800 | ||
| MAX.MOULD HEIGHT | mm | 810 | ||
| MIN.MOULD HEIGHT | mm | 330 | ||
| EJECTOR STROKE | mm | 240 | ||
| EJECTOR FORCE | kn | 150 | ||
| OTHERS | ||||
| MAX.PUMP PRESSURE | Mpa | 16 | ||
| PUMP MOTOR POWER | Kw | 55 | ||
| HEATING POWER | Kw | 31.4 | ||
| MACHINE DIMENSION(L*W*H) | m | 8.4*1.96*2.76 | ||
| OILTANK CUBAGE | L | 750 | ||
| MACHINE WEIGHT | t | 20 | ||
The above information is just for your reference. If you have special demands, please send your detailed drawing to us.