Product Main

Specifications

FREQ 16 Strobe/ FREQ 16 Strobe Light/Warning Caution Dj New Light/ Warning Caution Dj Strobe Light

Add more creativity to your lightshow with the FREQ 16 revolutionary 16-Zone LED Strobe. This 2-FX-IN-1fixture features a traditional LED strobe + 16-Zone chase effect.
]
The Zone chase effect gives lighting designers the ability to display this strobe bar vertical or horizontal creating chasing white light for a dynamic energy-driven light show. The FREQ 16 offers full DMX control with 4 DMX channel modes, dimming, strobe speed and chase speed. Users can also run the FREQ 16 in sound active mode, or manually control strobe speed and dimming on the back of the unit from it’ s potentiometer knobs. The FREQ 16 uses sixteen 5-Watt bright white LEDs and consumes a maximum of 91-Watts of power.
Specifications:
• Revolutionary 16-Zone LED Chasing Strobe
• 2-FX-IN-1: Traditional LED Strobe + 16-Zone chase effect
• 16x 5-Watt White bright LEDs (30,000 hr. Rated)
• 4-Button DMX LED Display
• 3 Operational modes: DMX controller, Master/Slave & Sound Active
• 4 DMX Channel modes (1, 2, 16 or 18 Ch. )
• Strobe speed: control via DMX or knob on rear of unit
• 0-100% dimming: control via DMX or knob on rear of unit
• Includes exciting sound activate built-in programs
• LED Strobe effect
• Strobe 1200 times per minute.
• No Moving Parts
• Fan cooled
• Extremely Long Life (30,000 hr. Rated)
• Runs extremely cool! - NO Duty Cycles! – Run all night!
• Includes hanging bracket
• Safety hook on rear panel
• Very low power consumption - connect more units in a single circuit
• IEC AC IN/OUT on rear to daisy chain power (up to 3 units)
• Compatible with American DJ UC3 Series easy-to-use controllers (sold Separately)
• Power Consumption: 91W maximum
• Multi-voltage operation: AC 100-240V 50/60Hz- IEC socket
• Dimensions (LxWxH): 35” x 5.75” x 4.5” / 887x141x110mm
• Weight: 8 lbs. / 3.6 kg.

FREQ 16 Strobe/ FREQ 16 Strobe Light/Warning Caution Dj New Light/ Warning Caution Dj Strobe Light

 
Our Main Products are
 
LED Stage Par Light Series
 
LED Effect Party Light Series
 
LED Moving Head Light Series
 
LED Strobe Light Series
 
LED Wall Washer Series
 
Main Board Series
 
We design PCB Board by ourselves, the main board and the light board are produced by ourselves. First, the lights made by ourselves seldom have problems. Second, if any wrong happens, only you need to take one or two videos of the problems lights. According to the video/videos, we can see the problems. And tell you how to repair it at the shortest time! If the buyer cannot repair it successfully, you can delivery the problems lights back to us, or we will send a replacement light to you. We also can do DIY Trade, tell us your thinking or ideas, we can help you make it come true!
Welcome to contact us, we' d like to offer our good quality and service for you, we will offer good service and introduction of the products, company and ourselves with much patience!