Technical features GTR BEAM200/230
Lamp: PHILIPS 200W /OSRAM 230W
Control: lamp on/off via console or manual
Ballast: Electronic ballast: 100V-240V
Color wheel: 14colors+open
Gobo wheel: static gobo 17+open
Gobo random position and counter-clockwise rotation
Strobe: independent strobe channel 1-12 flashes per second,
Dimmer: independent dimmer channel 0-100% linear dimmer
Frost: independent linear frost
Especial effect: cut light and lamp on/ off function
8 facet prism and amplification effect
Bi-directional prism rotation and position
Prism and gobo combination, built-in program
x/y movement: pan540, tilt 280,automatic pan/tilt correction,
independent pan/tilt speed adjustment, fine-turning function
x/y resolution: 8/16 bit
control and programming: 17 DMX512 control channel
stand-alone with master/slave function
Signal input: 3 or5 pin XLR male
Signal output: 3 or 5 pin XLR female
Dimension: L52*W47.5*H58.5cm
Speciality :
No. 1 Faster .The speed of our beam light is very fast. It only takes less than 2 seconds for X roller running the whole route while the Y roller just consumes 1 second. Its not only based on the first rate motors but first-rate self-design software .
No.2 Brighter .Our beam light is very bright. The spot lumen can reach up to 82500luxes in 20 meters away , which is the brightest of all the same kind light I have seen .Its because we have been in the light industry for more than 19 years with so much practical experience and we develop the better light path .
No.3 Light via console .Our beam lights are equipped with the function which can lighten the bulb by console .The lifetime of bulb can be extended because this improvement .There is on saying that lightening the bulb through the console can cause the unstable phenomena which is right but not the reason to improve it .Those who cannot make it are worried about their the cost will increase and the technology requirement about circuit is at a very high level .We put the interest of users at first took the risk and made it which increase the cost therefore . However its worthy .
No.4 Software cooling test system .Our beam lights are equipped with the cooling fan speed-testing system which prevent bulb from bursting by turning off the bulb automatically whenever the fan speed gets slower or broken unexpectedly. We have sold the beam light for more than 1 year without any bulb broken by the high temperature or any circuit board been burnt.
No.5 High standard imported spare parts .The color spare parts our lights equipped are made of nano materials imported from Taiwan baozhen optical company which can make the color purest .
No.6 The resolution of lens group we using are the highest in beam light industry .
No.7 Location precisely without any shaking no matter running quickly or slowly . The motors we adopting is Youtian motor which is leading in China motor industry .The resolution is 16 bit which makes the running more smoothly and location precisely .Its not only based on the first rate motors but first-rate self-design software .
No.8 Ours reset different DMX codes by LCD ,which save us from opening the whole light to reset the zero error caused by the transportation shaking .
No.9 8 lens zoom function . Our lights are not only equipped with the 8 lens but with lens zooming function .This function is very useful in indoor performance coz we can make the 8 pictures separated widely which others cannot do .