SA-FS4 Flash Alarm
Technology Parameter:
1.Circumstance Temperature:-10~+55 ℃
2.Circumstance Humidity:≤95% RH
3.Operating Voltage:DC24±15% V
4.Operating Current (average):200 mA
5.Flashing Intension:≥1.2 WS
6.Flashing Cycle:85-120 S
7.The Life-span of Flash Lamp’s Frequent Flashing:≥100000 Times
8.Dimension:105×80×65 mm
Product introduction:
Our company has developed the Light alarm in the near feature which is the terminal equipment of alarm. This equipment especially suits the occasion of alarm without sound (fire control).
The product’s index of flash is very great because it adopted the high volume flash lamp from German, it will shape up the effect from vision when input the low volume.
Using of FA-412 alarm have great adjustability, have rather lower require of inputting electrical source, permit to use within rather higher volume range, allow to supply the DC within rather higher output ripple factor, (can use the current of anti-commutate ripple directly). The optimal work-top of design is 24V voltage.
Remarks:
1.The index of capability was measured with inputting 24V Voltage. The cycle of flash and influence of volume were changed when the voltage change.
2.The alarm’s cycle of frequent flashing is set range from 85-120 temporarily. We can adjust suitably when customer has special request.
Installation:
1.First , drill two holes at place of setting (wall), the distance of holes is 65mm,at the same time setting plastic expand plug.(it can tighten with screw if the wall made of wood.)
2.Fix the base with two screw while draw the internet line from the square hole of connection of base.
3.Set the Sound & Light Alarm on the base and fixing with a screw.
Maintenance:
1.It is need to inspect the working situation of alarm periodically to make sure that the alarm works normally. Please not take down to repair personally and contact with our company if any abnormality happens.
2.Inspect the cleaning of alarm’s surface. Please scrape neatly with soft paper if it has stain.