5 Gallon Bottle Blowing Machine/Bottle Making Machine In 18.9Liters/Plastic Bottle Making Mahine by Preform Bottle

Functions of equipments:
1. Bottle blowing machine: make bottles.
2. Infrared oven: heat bottle preforms
3. Air compressor: the air source for PET stretch blow molding machine, carrying out the process of compressing
air from atmosphereto the required pressure.
4. Air filter: clear up the impurities out of the compressed air, like carbon-hydrogen, tiny dust and solid particles.

HY-B-I semi-automatic bottle blowing machine is suitable for producing PET plastic containers

and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water,

1. Adopting double crank to adjust mould ,heavy locking mould, stable and fast.

2. Adopt infrared oven to heat the perform ,the perform rotated and heated equally.

 meet the different requirements for the action and blow .It can provide sufficient and steady high  meet the different requirements for the  meet the different requirements for the action and blow .It can provide sufficient and steady high action and blow .It can provide sufficient and steady high

5 Gallon Bottle Blowing Machine/Bottle Making Machine In 18.9Liters/Plastic Bottle Making Mahine by Preform Bottle

4. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.

5. The machine can be operated in the step-by-step mode and the semi-auto mode.

6. The machine is small with low investment, easy and safe to operate.

Technical parameters of bottle blowing machine:

Model		HY-B-I
Capacity		800-1200PCS/H
Max.heating power		14kw
Pressure of air supply		2.5MPa
Max.dimension of mould		20*35*38cm
Max.shifting mould dimension		17cm
Center distance between two bottles		min9cm   max20cm
Max. stretched length		35cm
Weight		650kg
main machine size		1600*600*1610mm
Oven		1870*630*1450mm

When bottles are sent to the machine by conveyor continuously, they firstly are deliveried to the receiving wheel by air-slide conveyor and then to washing part. The bottle clamps hold the bottles and trun over 180°to wash, then return back to their original position after enough washing and drying. Then, the bottles are sent to the middle thumb wheel 1 and to the filling part to be filled, then moved by  middle thumb wheel 2 and reach to capping part to be capped, at the same time, cap trimmer sends caps to the top of the bottles and capper screws caps. At last, bottles are sent to the conveyor chain by the out stirring wheel to next working position.

  1.Adaptability is wide: Because all parts have a height adjust device, the height of bottle can be adjusted within the range of 120~320mm, the diameter can be adjusted within the range of Φ40-100mm.

  2.Production capacity can be adjusted continuously: using a frequency inverter to control the speed. So it works more reliable.

  3.This machine has a complete set of reliable protection system to protect the machine itself and the operator.

5 Gallon Bottle Blowing Machine/Bottle Making Machine In 18.9Liters/Plastic Bottle Making Mahine by Preform Bottle

showing you more of our machines