Plastic Injection Machine (HTW140-JD)
| ITEM | UNIT | A | B | C |
| INJECTION UNIT | ||||
| SCREW DIAMETER | mm | 38 | 42 | 45 |
| SCREW L/D RATIO | L/D | 22.1 | 20 | 18.6 |
| SHOT VOLUME(THEORETICAL) | cm3 | 193 | 235 | 270 |
| INJECTION WEIGHT(PS) | g | 176 | 213 | 246 |
| INJECTION RATE | g/s | 94 | 115 | 132 |
| INJECTION PRESSURE | Mpa | 205 | 170 | 147 |
| SCREW SPEED | rpm | 190 | ||
| CLAMPING UNIT | ||||
| CLAMP FORCE | Kn | 1400 | ||
| OPEN STROKE | mm | 380 | ||
| SPACE BETWEEN TIE BARS(W*H) | mm | 410*410 | ||
| MAX.MOULD HEIGHT | mm | 450 | ||
| MIN.MOULD HEIGHT | mm | 160 | ||
| EJECTOR STROKE | mm | 120 | ||
| EJECTOR FORCE | kn | 50 | ||
| OTHERS | ||||
| MAX.PUMP PRESSURE | Mpa | 16 | ||
| PUMP MOTOR POWER | Kw | 13 | ||
| HEATING POWER | Kw | 7.8 | ||
| MACHINE DIMENSION(L*W*H) | m | 4.48*1.33*1.9 | ||
| OILTANK CUBAGE | L | 270 | ||
| MACHINE WEIGHT | t | 4 | ||