ITEM | UNIT | SPECIFICATION | |||
Injection unit | Screw diameter | mm | A | B | C |
42 | 45 | 50 | |||
Screw ratio | L/D | 23.6 | 22 | 19.8 | |
Theoretical injection capacity | cm 3 | 305 | 350 | 432 | |
Shot weight(PS) | g | 277 | 319 | 393 | |
Injection rate | g/s | 138 | 160 | 196 | |
Injection pressure | Mpa | 203 | 177 | 143 | |
Max. Screw speed | r/min | 180 | |||
Clamping unit | Clamping force | KN | 1600 | ||
Opening stroke | mm | 435 | |||
Space between tie bar | mm x mm | 460× 460 | |||
Min. mould height | mm | 180 | |||
Max. mould height | mm | 520 | |||
Ejector stroke | mm | 135 | |||
Ejector force forward | KN | 50 | |||
Others | Sys. Pressure | MPa | 16 | ||
Pump Motor | kW | 18.5 | |||
Heater power | kW | 10.35 | |||
Oil tank capacity | L | 300 | |||
Machine dimensions(L× W× H) | m X m X m | 5.04 X 1.43 X2.12 | |||
Machine weight | Ton | 6 |