ITEM | UNIT | SPECIFICATION | |||
Injection unit | Screw diameter | mm | A | B | C |
36 | 40 | 45 | |||
Screw ratio | L/D | 24 | 22 | 19 | |
Theoretical injection capacity | cm 3 | 204 | 22 | 19 | |
Shot weight(PS) | g | 204 | 251 | 318 | |
Injection rate | g/s | 187 | 231 | 293 | |
Injection pressure | Mpa | 76 | 93 | 118 | |
Max. Screw speed | r/min | 215 | |||
Clamping unit | Clamping force | KN | 1300 | ||
Opening stroke | mm | 365 | |||
Space between tie bar | mm x mm | 420× 385 | |||
Min. mould height | mm | 150 | |||
Max. mould height | mm | 450 | |||
Ejector stroke | mm | 130 | |||
Ejector force forward | KN | 35 | |||
Others | Sys. Pressure | MPa | 16 | ||
Pump Motor | kW | 11 | |||
Heater power | kW | 8.6 | |||
Oil tank capacity | L | 120 | |||
Machine dimensions(L× W× H) | m X m X m | 4.5 X 1.2 X1.9 | |||
Machine weight | Ton | 3.5 |