ITEM	UNIT	SPECIFICATION
Injection unit	Screw diameter	mm	A	B	C
			55	60	65
	Screw ratio	L/D	22.9	21	19.4
	Theoretical injection capacity	cm 3	591.6	704	826.2
	Shot weight(PS)	g	538	641	752
	Injection rate	g/s	223.5	266	312.2
	Injection pressure	Mpa	202.3	170	144.9
	Max. Screw speed	r/min	220
Clamping unit	Clamping force	KN	2800
	Opening stroke	mm	590
	Space between tie bar	mm x mm	610× 610
	Min. mould height	mm	200
	Max. mould height	mm	630
	Ejector stroke	mm	150
	Ejector force forward	KN	70
Others	Sys. Pressure	MPa	16
	Pump Motor	kW	30
	Heater power	kW	18.3
	Oil tank capacity	L	385
	Machine dimensions(L× W× H)	m X m X m	5.98  X 1.66 X2.37
	Machine weight	Ton	9