ITEM	UNIT	SPECIFICATION
Injection unit	Screw diameter	mm	A	B	C
			55	60	65
	Screw ratio	L/D	24	22	20.3
	Theoretical injection capacity	cm 3	592	704	826.2
	Shot weight(PS)	g	539	641	752
	Injection rate	g/s	223.5	266	312.2
	Injection pressure	Mpa	202.3	170	144.9
	Max. Screw speed	r/min	220
Clamping unit	Clamping force	KN	2600
	Opening stroke	mm	550
	Space between tie bar	mm x mm	570× 570
	Min. mould height	mm	230
	Max. mould height	mm	600
	Ejector stroke	mm	150
	Ejector force forward	KN	65
Others	Sys. Pressure	MPa	16
	Pump Motor	kW	30
	Heater power	kW	19
	Oil tank capacity	L	385
	Machine dimensions(L× W× H)	m X m X m	6.2  X 1.5 X2.2
	Machine weight	Ton	8.3