Carbide disc blanks for solid carbide saw blades and disc cutters.
High precision and durability is the main advantages of our solid carbide disc blanks for slitting saw blades and disc cutters They're widely used to cut paper, tobacco, PCB board, aluminum, stainless steel, cooper and other metals.
Outside diameters ranges from 5mm to 300mm. Different holes and thickness are available upon your request
High precision and durability is the main advantages of our solid carbide disc blanks for slitting saw blades and disc cutters They're widely used to cut paper, tobacco, PCB board, aluminum, stainless steel, cooper and other metals.
Outside diameters ranges from 5mm to 300mm. Different holes and thickness are available upon your request
Grade | Density | T. R. S MPa | Hardness HRA | Performance & application recommended |
YG6A | 14.95 | 1800 | 92.5 | Fine grain alloy, good wear resistance. Semifinishing of chilled cast iron, non-ferrors metals alloys, semi-finishing and finishing of hardened steel, alloy steel. |
YG8 | 14.80 | 2200 | 89.5 | High strength in use, impact and shock resistance higher than YG6, but wear resistance and cutting speed comparatively lower. Roughing of cast irons, non-ferrors metals and their alloys as well as non metallic materials at low cutting speed. |
YG10X | 14.5 | 2400 | 91.5 | Fine grain alloy, good wear resistance. Used for processing hard wood, veneer board, PCB, PVC and metals. |
YL10.2 | 14.5 | 2400 | 91.8 | Fine grade alloy, with high wear resistance, high bending strength, high resistance to bonding, high thermal strength. Machining of refractory alloys, stainless steel and high manganese steel, etc. |
G20 | 14.3 | 2420 | 90.0 | Conventional wear resistance, high bending strength, used for steel alloy etc. |