3W LED Downlight Lights Ceiling Lamp Cool/Warm/ White 85~265V
Model: C030301(3X1W)
Product name:3X1W LED downlight
Driver:external
Input voltage: 85-265VAC
Working current: 350mA
Maximum power:3W(3X1W)
Luminous flux/Candela: 30 degree-500-600cd
Color temperature: 2700K-6500K
Beam angle: 15 degree, 20 degree, 30 degree, 45 degree, 60 degree, 90 degree
Emitting color: warm white, neutral white, cold white, red, yellow, blue, green
Operating temperature:-30- 50
Installation:built-in ceiling board
Dimensions(DXH)85X46mm
Holing size(DXH):70mm
Led down light,LED Ceiling Light, led ceiling lamp, led ceiling downlight, high power led downlight, white led downlight, white led ceiling light, energy saving led ceiling light, ceiling lights led, led dimmable down light, rectangle recessed led downlight
Applications of LED ceiling light
1.Recessed lighting, shelf lighting, ceiling/wall coves
2.Cabinet and under counter lighting, office work station
3.Back, step lighting and light boxes
4.Merchandising, exhibition stands and panels
LED ceiling light installation instructions
Drill a hole with 88 to 93 mm diameter in the mounting surface. Plug the Recessed LED Lighting fixture into the hole while holding the retaining springs in upright position. Connect the LED light to the driver with the plug-in connectors. Driver should be hard wired to line voltage. Depending where you want the driver to be placed, you can extend the line voltage cables to the driver or the low voltage cable between the driver and the lighting fixture. Recessed pot cans (housings) are not included and we do not sell such. Insulation should not touch the metal fans of the back of the fixture to allow free air flow and proper cooling.
1.Recessed lighting, shelf lighting, ceiling/wall coves
2.Cabinet and under counter lighting, office work station
3.Back, step lighting and light boxes
4.Merchandising, exhibition stands and panels
LED ceiling light installation instructions
Drill a hole with 88 to 93 mm diameter in the mounting surface. Plug the Recessed LED Lighting fixture into the hole while holding the retaining springs in upright position. Connect the LED light to the driver with the plug-in connectors. Driver should be hard wired to line voltage. Depending where you want the driver to be placed, you can extend the line voltage cables to the driver or the low voltage cable between the driver and the lighting fixture. Recessed pot cans (housings) are not included and we do not sell such. Insulation should not touch the metal fans of the back of the fixture to allow free air flow and proper cooling.