Wood Charcoal Making Machine Specification:
|
Model
|
I
|
II
|
III
|
|
|
Capacity
|
120-180kg/h
|
180-240kg/h
|
240-320kg/h
|
|
|
Power
|
11+4.5kw
|
18.5+4.5kw
|
22+4.5kw
|
|
|
Diameter of finished product
|
40,50,55mm
|
60,70,80mm
|
80mm
|
|
|
Shape of finished product
|
hexagonal, square and round
|
|||
|
Raw materials
|
Water(8-12%),diameter(3-5mm)
|
|||
|
Important parts
|
propeller, inner sleeve and heating ring
|
|||
Charcoal rods making machine is the device for the raw material(such as wood, sawdust, peanut shells, corn, sugarcane bagasse, cotton stalk, corn stalk, rice husk, sawdust, miscellaneous branches and so on) cruse into the granular within 10mm. the moisture content of less than 12% after drying, enter the bar make shape by the high temperature high pressure(do not add any additives),into the carbonization furnace(self-built kiln ) to carbonization, is the finished product charcoal.
Structure of Wood Charcoal Making Machine:
Charcoal Rods Making Machine adopts the oil-immersed alloy structure. Charcoal Rods Making Machine drive shaft and the key elements adopt with special abrasion resistant materials. The propulsion shaft abrasion resistance has been greatly improved. Charcoal Rods Making Machine with high capacity, low energy consumption, wear resistance and a number of performance indicators in the leading level, has a high market share in the domestic market.