The production of Charcoal Rods can be divided into four steps:
1. Firstly, the raw materials are crushed into particles by wood crushing machine.
2. Secondly, particles should be drying by wood drier, pay attention to control moisture.
3. Thirdly, the particles materials made into rod by charcoal rod making machine.
4. Finally, charcoal carbonized in the carbonization furnace, then cooling, is the production charcoal.
Charcoal rods making machine application:
Charcoal rods making machine is the device for the raw material(such as wood, sawdust, peanut shells, corn, sugarcane bagasse, cotton stalk, corn stalk, rice husk, sawdust, miscellaneous branches and so on) cruse into the granular within 10mm. the moisture content of less than 12% after drying, enter the bar make shape by the high temperature high pressure(do not add any additives),into the carbonization furnace(self-built kiln ) to carbonization, is the finished product charcoal.
1. Firstly, the raw materials are crushed into particles by wood crushing machine.
2. Secondly, particles should be drying by wood drier, pay attention to control moisture.
3. Thirdly, the particles materials made into rod by charcoal rod making machine.
4. Finally, charcoal carbonized in the carbonization furnace, then cooling, is the production charcoal.
Charcoal rods making machine application:
Charcoal rods making machine is the device for the raw material(such as wood, sawdust, peanut shells, corn, sugarcane bagasse, cotton stalk, corn stalk, rice husk, sawdust, miscellaneous branches and so on) cruse into the granular within 10mm. the moisture content of less than 12% after drying, enter the bar make shape by the high temperature high pressure(do not add any additives),into the carbonization furnace(self-built kiln ) to carbonization, is the finished product charcoal.
Charcoal Rods Making Machine Specification:
|
Model
|
I
|
II
|
III
|
|
|
Capacity
|
120-180kg/h
|
180-240kg/h
|
240-320kg/h
|
|
|
Power
|
11+4.5kw
|
18.5+4.5kw
|
22+4.5kw
|
|
|
Diameter of finished product
|
40,50,55mm
|
60,70,80mm
|
80mm
|
|
|
Shape of finished product
|
hexagonal, square and round
|
|||
|
Raw materials
|
Water(8-12%),diameter(3-5mm)
|
|||
|
Important parts
|
propeller, inner sleeve and heating ring
|
|||