Compressible limb therapy system, main principle is based on the cavity air bag sequentially repeated charging and discharging, formed on the body and tissue cyclic pressure, and to promote blood and lymph flow and microcirculation improving effect; can directly or indirectly therapy with blood and lymph circulation associated with many diseases, this technology already obtained the international medical community recognition, and is widely clinical application of Department of orthopedics, Department of Endocrinology, Department of rehabilitation, surgery, oncology and other fields.

 

 

 

Compressible limb therapy system indications:

1. Indications lymph edema

2. Limb paralysis(cerebral infarction)

3. Limb convulsion(pain clinic)

4. Pregnant woman’ s limb management

5. Chronic desease by the venous cause

6. Fat dissolution

7. Rheumatoid art arthritis

8. Improvement of intestines, dissolution constipation

9. Benumbed feet and hands settlement of stress

10. Effect of exercise

11. The old and the weak, fatigue, bore dome, insomnia

12. Person who want to be elastic skin and a healthier body

13. DVT(deep vein thrombosis/PE) pneumatic embolism

14. Varicose vein therapy and prevention

 

Compressible limb therapy system features:

1. Two cuffs may be used at the same time on A and B outlets.

2. Close an outlet with a jack when using only one outlet.

3. Choose a pressure level with digital pressure system.

4. Get diverse effects through mode selection.

 

Compressible limb therapy system purpose:

Compressible limb therapy system is a pneumatic pressure treatment system that repeats expansion sleeves to help blood circulation and prevent blood clots or clogs.

 

Compressible limb therapy system specification:

 

 

Compressible limb therapy system Caution:

1. The women in pregnancy ormenstruation are certainly required to use after consultation with doctor.

2. Please avoid same time with medical equipments for artificial life preservation, installation style medical equipments like electrocardiograph etc.

3. Please avoid to user’ s the device to whom in too high blood pressure or obstacle in blood circulation.

4. Do not use this product if you are experiencing inflammation, an infection, pain of unknown originmor bleeding(internal or external) at near the site of application.

5. When plugging or un plugging the power cord from the wall outlet, please remove moisture from hands. (it may cause the electric shock, electric leakage or fire. )

6. Check up the suitable voltage to be used and use the device. (the user may be burned, get shocked or be injured. )

7. Do not place the heavy things on the power cord. Also, do not press it with a table or a chair. (it may cause an electric shock, an electric leakage, or fire)

8. Do not soak the device in the water because it is an electrical product.

9. Do not fall down the device not to receive too much vibration and shock

10. Do not use by purpose except massage.

11. Please use after wearing underwear or sportswear not to touch directly in skin with the cuffs or pad.

12. If you experience pain at any time while using, this product, stop using it immediately.

13. If this device should malfunction or fail to operate, do not attempt to open, repair, or disassemble the main unit or this device.

14. While using this product, remain stationary and do not attempt to walk or move around.

15. Use the device within twenty minutes when using it once. (At first, start from 5 minutes, and increase the time slowly considering you physical strength. If you use it continuously for a long time, it may have a reverse effect on you.

16. If you have not used the device for a long time, or if you wise to use it in cold areas. The decive may not perate normally. In this case, use the device after operating it three of four times at the strength of low-medium-high in regular sequence.

17. Be careful about the air hose not to be twisted or bent.

18. Forbids the machinery and tools which occurs the electromagnetic waves and a parallelism use. There is a possibility becoming the cause of machinery and tools malfunction.

 

How to use:

1. Insert the power plug into the outlet. -check us the suitable voltage to be used and use the device.

2. Turn on the power-Press the “ ON: button.

3. Regulate the pressure properly. (True pressure has plus or minus tenpercent error. ) -When using this device for the first time, move from “ MIN” to “ MAX” smoothly.

-Regulate its strength properly because the pressure when using the only one side will get stronger than that when using both sides.

-Set of pressure chooses in 0-240mmHg using pressure regulator. (using according to doctor’ s prescription if possible)

4. Regulate the time to be used. (The first setting time is 50 minutes. )

-when using this device for the first time, increase the time slowly starting from 5 minutes or 10 minutes.

5. Regulate the mode to be used. (the first time mode is A mode. )

6. Regulate the speed to be used.

7. Press the “ start/stop” button.

-If the regulated time were past, the operation would stop.