Main Technique Parameters:
|
Rig Weight: 24T
|
Size (L×W×H mm): 11100×2650×2800
|
|
Max. Push & Pull Force: 1050KN(35Mpa)
|
Max. Torque: 33000N·m(35Mpa)
|
|
Max. Rotary Speed: 95r/min
|
Max. Rotary Speed: 27m/min
|
|
Max. Mud Flow: 600L/min
|
Max. Mud Pressure: 10Mpa
|
|
Diameter of Expanding Aperture: 1300mm(ground condition depended)
|
Max. Work Distance: 900m (ground condition depended)
|
|
Drill Entry Angle: 8-20°
|
Max. Climbing Gradient: 20°
|
Main PerformanceCharacteristics:
1,The rotary and push and pull adopts closed-circuit, which can low down the temperature and reduce the near. Other assistant mechanical adopts open circuit driven by high pressure gear pump.
2,The Girder adopts four-connecting rod to increasing the range of the entry angle. Meanwhile, it makes sure of
the caterpillar landed on the ground when rig in big angle, which improves the safety;
3,Balance of the clamp makes sure of the concentricity and protection of the rod thread;
4,Cabin can automatically move up and rotate, which improves the view, with warm and cold air conditioner;
5,Transfer case made in German improves the Rotary and Push & Pull Speed;
6,The arrangements of oil pipes are reasonable and clear, the structure of the chassis is enhanced;
7,Safe wire -controlled walking system;
8,The floating of power head can effectively protect drilling pipe and screw thread for the convenience of moving drilling pipe up and down;
9,The advanced hydraulic system improve15-20% of the work efficiency, reduces 50% heat lost and saves 15-20% energy;
10,Cooling system is equipped on the power head, which can protect the speed reducers and motors.
11,Unique design of the mechanical hand reduce the workforce and improve the work efficiency.