Overview
With the Leeb hardness measuring principle, the pen-type hardness tester MH100 can do test easily and quickly to various metallic material. It can show the hardness measuring value immediately and can switch to other scales freely.

Specification

*Measuring Range: (170-960)HLD, (17-68.5)HRC, (19-651)HB, (80-976)HV, (30-100)HS, (59-85)HRA, (13 -100)HRB                              
*Measuring Direction : Supprt 0~360º
*Hardness Scales: HL, HB, HRB, HRC, HRA, HV, HS
*Display: HD dox matrix LCD and LED backlight
*Data Memory: Max. 500 groups(relative to impact device 32～1)
*Working Power: 3.6V(Integrated Lithium battery and rechargable circuit

*Continous Working Period: about 200 hours (without using backlight)
*Communciation Interface: USB1.1 port

Applicable Materials

Applicable materials: steel and cast steel, cold work tool steel, stainess stee;. Grey cast iron, nodular cast iron, cast aluminum alloys,BRASS (copper-zinc alloys), BRONZE(copper-aluminum/tin alloys), pure copper and forged steel

Working Conditions

Operating temperature -20℃～＋60℃;

Storage temperature: -30℃～＋60℃

Relative humidity: ≤90％;

The surrounding environment should avoid of vibration, strong magnetic field, corrosive medium and heavy dust.

 

Standard Configurations
1．Main Unit      1
2．Cleaning brush  1
3．Small support ring  1

4. Standard block   1

5. Dataproceeding Soatware with cable  1
6．Accompany documents (including manual, quality certifcate, warranty card and packing list )  1 set
7．ABS instrument case 1