Spray equipment

Polyurethane high pressure spray equipment  INTC-III

 

INTC-III is the high pressure polyurethane airless spray and perfusion system which uses parts from US well-known brand can effectively assure the pressure for double materials blending.

The individual 2500W heaters which can provide with stable calefaction resource effectively solve the viscosity issue in the process of bleeding. The  heating & preserved pipe with 15 meter length can keep the caloric of the materials. The solvent free cleaning system can provide with an easier operation and maintenance.

INTC-III the high pressure polyurethane airless spray and perfusion system makes the operation much easier, convenient and materials saved.

 

Standard configure:

mainframe:1 set
spray gun:1 set
Heating and persevered pipe: 15M/ 1 set  

pipe for connecing the gun:1.5M /1 set

Max length(for reference): 45 M
Transfer pump: 2 sets

Technical parameter

Power source: single phase 220V  50Hz  7000W

Air source:  0.5-0.8Mpa(70-120psi)>0.9m³ /minute

Output: 4-8kg/minute

The power of material heater         2500W×2

The power of pipe :2000W

output pressure of unit raw material :5-10Mpa(700-1500psi)

Shipping parameter:

weight:130kg
Cubage.:800X700X1100mm