Video transmission via UTP CAT5 cable.

Over 10-20% wire costs saved.

Full-motion CCTV video at distances up to 2000ft B/W(600m), 1500ft Color (400m)

Building video filter and loop termination circuit

'HUM-BARs' rejective video BALUN transceiver

Outstanding interference rejection and transient protection.

Building in lightning protection glass/ceramic gas tuber. (Optional)

Male BNC with 180mm minil cable allows connection directly to the camera or DVR.

No power required.

Up to 3,000ft (1km) with active receiver or hub.

For more information, please contact with authorized distributors.

Attenuation
DC to 5 Mhz: 1.5 dB max
Common-mode rejection
15KHz to 5 Mhz: 60 dB typ
Impedance
Coax Cable, Male BNC (or RCA) 75 ohms
UTP, Screw Terminals Block or RJ45 Jack - 100 ohms
Wire Type
Network Wiring: One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm) per signal
Category Type: Cat 2 or better
Impedance: 100 ± 20 ohms
DC Loop Resistance: 26 ohms max
Differential Capacitance: 19 pF/ft max
Wire Length, camera to monitor including coax, 1,500 ft (400 m), can be up to 2000ft max (600m) B/W signal

Connector Interfaces
Video:Femal BNC connector or Male BNC connector with 180mm coxial cable
Network Interface: Screw Terminal Block or RJ45 Jack for UTP pair cable

Environmental
Temperature: 0 to +50° C
Humidity (non-condensing): 0 to 95%
ESD Susceptibility (200 pf probe) : 20 KV
Mechanical
Dimensions no excluding BNC: Depend on Models
Weight: Depend on Models
Material: Metal Case, 1U, 19" Rack Mounting
Mounting: Metal Mounting Hole
Package: Paper Box